jedadiah
Well-Known Member
I have had some weird behavior when pulling my trailer, so hopefully the update will fix it. The most common error I get is the Blind Spot Monitoring disabling.
It'll stop compensating for the length of the trailer. it's annoying because the same system always worked on my '21 Ranger. If I pull over, choose a different trailer in the trailer setting menu, and then choose my actual saved trailer again, it will work for the rest of the drive. The error usually shows up not long after leaving my driveway.
I've seen the other trailer brake fault error not long after I bought my truck, but I cleaned up the socket and re-greased ti with some good dielectric grease a while back and have never seen it since.
It'll stop compensating for the length of the trailer. it's annoying because the same system always worked on my '21 Ranger. If I pull over, choose a different trailer in the trailer setting menu, and then choose my actual saved trailer again, it will work for the rest of the drive. The error usually shows up not long after leaving my driveway.
I've seen the other trailer brake fault error not long after I bought my truck, but I cleaned up the socket and re-greased ti with some good dielectric grease a while back and have never seen it since.
Sponsored