2026 Ranger XL "Steelies" stock rim

[Cyberwiz64]

I just purchased a 2026 Ranger XL. It has the painted rims which I would call "Steelies". The rim on the steelies show "17 X 7 1/2J. I am looking at wheels.

I found wheels I like the specs are 17x8.5 6 bolt pattern should fit the Ranger. Will this wheel work with my Ranger and the existing tires?

Thank you in advance.

Sponsored

 

[stemplar]

Maybe? The lug pattern needs to be 6x139.7 (6x5.5”), and consider the offset in concert with the tire size you want to mount.

 

[Cyberwiz64]

here's the specs on the ones I am looking at

• 17" x 8.5" wide
• 6-lug, 139.7 mm bolt circle
• 55 mm offset
• 177.5 mm backspacing

 

[surfstar]

If you're cheap like me, I'd look into take-offs.
Bronco wheels will fit and people dump them for dirt cheap with new factory tires...

 

[superj]

Bolt Pattern: 6 × 139.7 mm (or 6 × 5.5 inches)
Center Bore: 93.1 mm
Thread Pitch: M12 × 1.5
Factory Offset: +55 mm
Factory Rim Sizes: 7.5J × 17 or 8J × 18

That's stock according to googly so you will be good. .5 inch wider wheel is .25 per side

 

[DJThruxton]

If you're cheap like me, I'd look into take-offs.
Bronco wheels will fit and people dump them for dirt cheap with new factory tires...

Exactly what I did.

 

[Cyberwiz64]

This is what I bought and with 25% off it came out to $90 a wheel

https://www.ford.com/product/ranger-17-x-85-dyno-gray-single-wheel-p2754980051

 

[Johnnypedals]

This is what I bought and with 25% off it came out to $90 a wheel

https://www.ford.com/product/ranger-17-x-85-dyno-gray-single-wheel-p2754980051

I really like these, Please post pictures after you get them installed. Are you letting the dealer do the install? Are you just moving over the factory tires?

 

[Cyberwiz64]

I am using the factory tires. I have to figure out the side steps because they don't stick out much. I will see what I can negotiate when I am there. Hopefully we can work out a deal

Sponsored