What did you do to your Ranger Raptor Today?

[Lion77]

Ford Performance Pro Cal installation. About a month prior, application of DLC coatings to the entire powertrain to achieve a super lubricity coefficient of friction less than 0.01.

Perfect combination for enhancing power and durability of the powertrain of my 2024 RR.

Directly from SAE.ORG/DOD maintenance symposium. Great technology for improving the overall performance and durability of high-boost engines and modern powertrains.

Sponsored

 

[Hoss]

Waste of money…snake oil

 

[Thatch11b]

Put on tailgate trim and installed the Morimoto third brake light.

 

[Slyder]

I also installed the Morimoto third brake light, but the gap between the roof and the upper edge of the light is bigger than I like and a bit unnerving.

I shined a light and couldn't see any gap and then poured water around it and saw nothing...for now at least.

 

[pablo94sc]

I took it through the car wash. Very exciting day.

 

[SubNuke]

Just bought mine last night. Shadow Black.

 

[Lion77]

Leaked some coolant today (at least I think there might be a leak) like a few other RR, BR and F-150 owners...

 

[Full-size no more]

Worked on placement of hinges for my diy bed drawer platform

 

[Catalyst]

Installed a RAM Mount - RAM Flex Adhesive Double Ball Mount for Apple 25W MagSafe with an Apple 25W MagSafe charger connected to the USB C port. The built in wireless charger was pathetic and now I can have a good spot for my phone to sit and charge without overheating…

 

[Fawnbuster]

I picked up my new Rough Country 12,000 lb winch that I won at a local auction today. $85 for a $495 winch. Just gotta take delivery in June then save up for the new bumper.

 

[pablo94sc]

Did the driver side rear door today. Inner and outer skin are about 75% covered. Where you see white in the inner skin, there is likely CLD on the inside so it wouldn't interfere with the foam inserts or door card clips.

The door card got about about 35% coverage, mainly around the door pocket and grill as those tend to rattle. It'll probably need some more on the top portion as well, but I'll add that once I get a chance to listen for rattles and decide if the doors need some spot treatment of CCF and additional insulation (thinking thinsulate 600).

Took just over two sheets (8sqft) of the NVX 90mil CLD for that door alone. I estimated 9 per door, so I'm glad I'm under.

 

[Thatch11b]

I also installed the Morimoto third brake light, but the gap between the roof and the upper edge of the light is bigger than I like and a bit unnerving.

I shined a light and couldn't see any gap and then poured water around it and saw nothing...for now at least.

I didn’t see that with mine. I always do worry about leaks when I first switch out third brake lights.

 

[banjo5]

Installed a RAM Mount - RAM Flex Adhesive Double Ball Mount for Apple 25W MagSafe with an Apple 25W MagSafe charger connected to the USB C port. The built in wireless charger was pathetic and now I can have a good spot for my phone to sit and charge without overheating…

Nice option. I've had my '25 RR about 2 weeks and thought something was wrong with the wireless charger. I don't think my iPhone charged at all on that thing. It sucks to have the option and yet doesn't work.

 

[SubNuke]

Nice option. I've had my '25 RR about 2 weeks and thought something was wrong with the wireless charger. I don't think my iPhone charged at all on that thing. It sucks to have the option and yet doesn't work.

The Bronco charging pad was horrible. Really not worth it.

 

[Bt_okst]

The charging pads in most vehicles are a joke. If phone moves at all it quits charging.

I bought 6 inch usb c to usb c cables. They work great and do fast charges instead of trickle charges with my phone.

https://a.co/d/8qXUktH

Sponsored