What did you do to your Ranger Raptor Today?

[HHIRAP]

Fabricated some running board drain hole block off plates. It took me about 30 minutes total time to make. I made a template out of cardboard, used some scrap aluminum I had in the garage, DA sanded them and sprayed them with “Raptor” bed liner.

Sponsored

 

[DaStockST]

Fabricated some running board drain hole block off plates. It took me about 30 minutes total time to make. I made a template out of cardboard, used some scrap aluminum I had in the garage, DA sanded them and sprayed them with “Raptor” bed liner.

You want to make a set to sell?

 

[HHIRAP]

You want to make a set to sell?

I’m actually going to make another set out of 1/8 inch ABS textured board today and see how those look. Much cheaper than aluminum and no need to spray bed liner on them.

 

[NASSTY]

I did something similar when I had my 2017 and 2020 F150 Raptors. I used a thick piece of rubber that was a mud flap from a dump truck. The first pic is from when I was trial fitting it on my 2017 Raptor.
The 2nd pic shows the inserts I run on my Ranger Raptor. They were a little pricey but they look better the home made ones I had.

 

[DivRanger]

As requested!

https://desertdoesit.com/collections/all/ranger-----2019-2022+ranger---2019-2023+ranger---2019-

As requested!

https://desertdoesit.com/collections/all/ranger-----2019-2022+ranger---2019-2023+ranger---2019-

The product fitment says its for Rangers 2019-2023. Were you able to mount it to your 2025 RR without any modifications? Thanks for your feedback!

 

[Daweism]

I did something similar when I had my 2017 and 2020 F150 Raptors. I used a thick piece of rubber that was a mud flap from a dump truck. The first pic is from when I was trial fitting it on my 2017 Raptor.
The 2nd pic shows the inserts I run on my Ranger Raptor. They were a little pricey but they look better the home made ones I had.

Where buy hole fill?

 

[NASSTY]

Where buy hole fill?

Ebay. They come from Australia so with shipping fees they are a little pricey. If you search the sellers other items, they have different designs and colors.

Ford Next-Gen Ranger Raptor side step inserts w/wo drain holes. | eBay

 

[cc1999]

I had my Bronco wheel rings powder coated anthracite grey and got them back last week.
Installed them last night.

I had the Ranger rings on my Bronco rims prior.
Seen here.

These are the Bronco rings on the bronco rims
seen here.

 

[Lion77]

 

[Lion77]

I had my Bronco wheel rings powder coated anthracite grey and got them back last week.
Installed them last night.

I had the Ranger rings on my Bronco rims prior.
Seen here.

These are the Bronco rings on the bronco rims
seen here.

I have those same tires on our CX-9, great tire. We have 65k on them and they still have 5/32 tread! Although they are more of a "light duty" road-oriented AT tire vs. the K03, but still very versatile.

 

[Thatch11b]

Raptor lined the lower silver front bumper cover. Went pretty smoothly other than breaking one tab.

 

[miniR]

Painted my exhaust outlets. Extremely happy with the new look, should have came this way from the assembly line IMO.

 

[Bill Hippel]

Just hand washed and dried today.

 

[Daweism]

RTR Evo 6 17x9 30mm
Stubby Antenna
Front driver and passenger window tint
Start stop eliminator

 

[Catalyst]

RTR Evo 6 17x9 30mm
Stubby Antenna
Front driver and passenger window tint
Start stop eliminator

Looks great! At times I wish the Velocity Blue one I ordered actually arrived, and when I see yours I feel it more... but I'm really happy with white too The RTR wheels are such a good choice for the RR!

Sponsored