American Adventure Lab Ford Ranger Trailer Plug Tuck Kit Install

[freakshow999]

Thanks for the feedback! I'll assume everyone is good with the tolerance until the consensus changes. I really appreciate you guys taking the time to reply. That's exactly what we want to get from and give to this forum community.

Mine just won't go I attempted the mallet and it's just too tight. My OEM cutout is 1.5/8" while yours is around 1.3/8". When I squeezed my clamps down as far as they could go they end of even with the rectangular piece of the connector you have the right side cutout for. It's looks light your mount is opposite to the way the OEM is cutout. Are you the one that answers support emails? Could you PM me please. I'd rather have a brief private conversation.

[/url]

[/url]

Sponsored

 

[Unit 91]

Do you have calipers that can get a more accurate measurement? There really shouldn't be this much variation in trucks.

I mentioned before, but mine did need a solid whack to seat. It's probably never coming out, but it worked great.

 

[freakshow999]

Do you have calipers that can get a more accurate measurement? There really shouldn't be this much variation in trucks.

I mentioned before, but mine did need a solid whack to seat. It's probably never coming out, but it worked great.

Somewhere yes! lol I will try to find them and measure professionally!

 

[Unit 91]

Somewhere yes! lol I will try to find them and measure professionally!

It's just odd how some folks have no issues and some are really tight. Really wonder where the deviation is.

 

[JR007]

Mine just won't go I attempted the mallet and it's just too tight. My OEM cutout is 1.5/8" while yours is around 1.3/8". When I squeezed my clamps down as far as they could go they end of even with the rectangular piece of the connector you have the right side cutout for. It's looks light your mount is opposite to the way the OEM is cutout. Are you the one that answers support emails? Could you PM me please. I'd rather have a brief private conversation.

[/url]

[/url]

Same. I just cannot get mine to set.

 

[jordantii]

Maybe they need to check their manufacturing. Such a discrepancy for some customers. Mine was tight but went it perfectly. Yet some say it's too tight. I'm not sure what tooling they are using but tools wear out. I'm sure Brit knows this but maybe something to check.

 

[Unit 91]

Maybe they need to check their manufacturing. Such a discrepancy for some customers. Mine was tight but went it perfectly. Yet some say it's too tight. I'm not sure what tooling they are using but tools wear out. I'm sure Brit knows this but maybe something to check.

Hence getting some more precise measurements from folks.

 

[freakshow999]

Hence getting some more precise measurements from folks.

I ordered a new caliper it'll be here tonight between 5-10pm PST!

Oh and my manufacturing date is 03/2026 if that helps anyone else! So I'm only speaking for a 2026 Ranger Raptor...

Sponsored