Sponsored

Car wash tips

Savage160

Active Member
First Name
Jorge
Joined
Jul 14, 2026
Threads
5
Messages
33
Reaction score
21
Location
Hixson, TN
Vehicle(s)
2026 Ford Ranger XLT
Along with becoming absolutely obsessed with tinkering on my truck after getting my Ranger, I’ve become pretty consumed with keeping my truck clean, inside and out. I was wondering if you guys had any best practices for washing the truck?

My current struggle is figuring out how best to dry my truck. I don’t enjoy using drying towels especially because it’s been so hot that the water dries before I can get to it with the towel and then I have to deal with the water stains… I’ve been curious about using a blower and have seen some videos about people using the Wolfbox blowers to dry their cars, but I didn’t know if that was an internet fad or if it’s legit. Anyone have experience with using something of this nature? Or is towel drying the best approach?
Sponsored

 

CACTUSGREYFX4

Well-Known Member
First Name
Pat
Joined
Jun 13, 2023
Threads
7
Messages
1,721
Reaction score
1,577
Location
ON, Canada
Vehicle(s)
2024 Ford Ranger Lariat FX4
Occupation
Fire Dept Dispatcher
I use the Wolfbox to blow the excess off. Use to use a leaf blower but this is way smaller and easy to get in tight places.
 
OP
OP
Savage160

Savage160

Active Member
First Name
Jorge
Joined
Jul 14, 2026
Threads
5
Messages
33
Reaction score
21
Location
Hixson, TN
Vehicle(s)
2026 Ford Ranger XLT
Nice! Which one do you recommend? I just looked and it seems like there are a lot of options haha!
 

stemplar

Well-Known Member
Joined
Sep 7, 2023
Threads
19
Messages
765
Reaction score
1,094
Location
Pennsylvania
Vehicle(s)
2025 Ranger Lariat 2.7
I also struggled with water spots from water drying before I finished washing. I now use a "spotless" water filter system and that solved the problem, but it wasn't cheap. I got the dic-20 with resin bypass from crspotless.com and use it everytime I wash a vehicle, including my motorcycles, trailers, etc. I run the hose to it, and a short connector hose from it to my power washer with foam canon. I bypass the spotless resin (edit: bypass with the dic-20's built-in bypass valve or switch) while washing then switch to resin-filtered for rinsing and it works well. I use my leaf blower to get most of the water off, and quickly finish with soft towels. I'm able to store both the resin filter and the power washer near my garage door so it's really easy to roll them both out and use them.
Sponsored

 
 







Top