Sponsored

Car wash tips

Savage160

Active Member
First Name
Jorge
Joined
Jul 14, 2026
Threads
5
Messages
33
Reaction score
22
Location
Hixson, TN
Vehicle(s)
2026 Ford Ranger XLT
Along with becoming absolutely obsessed with tinkering on my truck after getting my Ranger, I’ve become pretty consumed with keeping my truck clean, inside and out. I was wondering if you guys had any best practices for washing the truck?

My current struggle is figuring out how best to dry my truck. I don’t enjoy using drying towels especially because it’s been so hot that the water dries before I can get to it with the towel and then I have to deal with the water stains… I’ve been curious about using a blower and have seen some videos about people using the Wolfbox blowers to dry their cars, but I didn’t know if that was an internet fad or if it’s legit. Anyone have experience with using something of this nature? Or is towel drying the best approach?
Sponsored

 

CACTUSGREYFX4

Well-Known Member
First Name
Pat
Joined
Jun 13, 2023
Threads
7
Messages
1,723
Reaction score
1,582
Location
ON, Canada
Vehicle(s)
2024 Ford Ranger Lariat FX4
Occupation
Fire Dept Dispatcher
I use the Wolfbox to blow the excess off. Use to use a leaf blower but this is way smaller and easy to get in tight places.
 
OP
OP
Savage160

Savage160

Active Member
First Name
Jorge
Joined
Jul 14, 2026
Threads
5
Messages
33
Reaction score
22
Location
Hixson, TN
Vehicle(s)
2026 Ford Ranger XLT
Nice! Which one do you recommend? I just looked and it seems like there are a lot of options haha!
 

stemplar

Well-Known Member
Joined
Sep 7, 2023
Threads
19
Messages
767
Reaction score
1,098
Location
Pennsylvania
Vehicle(s)
2025 Ranger Lariat 2.7
I also struggled with water spots from water drying before I finished washing. I now use a "spotless" water filter system and that solved the problem, but it wasn't cheap. I got the dic-20 with resin bypass from crspotless.com and use it everytime I wash a vehicle, including my motorcycles, trailers, etc. I run the hose to it, and a short connector hose from it to my power washer with foam canon. I bypass the spotless resin (edit: bypass with the dic-20's built-in bypass valve or switch) while washing then switch to resin-filtered for rinsing and it works well. I use my leaf blower to get most of the water off, and quickly finish with soft towels. I'm able to store both the resin filter and the power washer near my garage door so it's really easy to roll them both out and use them.
 

CACTUSGREYFX4

Well-Known Member
First Name
Pat
Joined
Jun 13, 2023
Threads
7
Messages
1,723
Reaction score
1,582
Location
ON, Canada
Vehicle(s)
2024 Ford Ranger Lariat FX4
Occupation
Fire Dept Dispatcher
Nice! Which one do you recommend? I just looked and it seems like there are a lot of options haha!
I got the Wolfbox MF200 with a spare battery. They have them on sale every so often. I comment on one of their sales saying nothing for Canada and then they sent me a personal coupon number. Think I saved like $75.
 

Sponsored

jawzborne

Member
Joined
Dec 26, 2025
Threads
2
Messages
15
Reaction score
23
Location
California
Vehicle(s)
2025 Ford Ranger XLT
I bought the McKillans XL on Amazon. Works great, I can soak up almost the whole truck before I have to squeeze it out. I’ll then go over everything with waterless wash or meguiars detailer to get any water spots or areas I missed.

If you can’t get out of the sun, I think best process would be to strip it down once, get a good wax coat on there, and then every time you clean it from then on just use a blower to get what you can off as fast as you can.

I’ve found it’s best to wash in the morning before the suns out for the best results no matter what.
 

bigb

Well-Known Member
First Name
Brian
Joined
Aug 6, 2025
Threads
59
Messages
780
Reaction score
919
Location
Tucson
Vehicle(s)
2025 Ranger 2.7
The Ranger is most drippy vehicle I have ever washed, there's so many places water gets trapped. I'm going to have to get one of those Wolfbox blowers.

For a spot free rinse I went back and forth trying to decide on a system. Where I live the water is high in alkali and the system cartridges probably wouldn't last long. Then I saw a You Tube of a car detailer using distilled water in a 5 gallon bucket with a WORX 20 volt pressure washer, genius. No cartridges to change and no system to buy and set up, a couple gallons rinses the whole vehicle and gives time to hand dry without worrying about water spots. I've been using it on all my vehicles for a couple years now.
 

jordantii

Well-Known Member
First Name
Jordan
Joined
Dec 12, 2025
Threads
21
Messages
492
Reaction score
471
Location
Tampa Bay
Website
www.straptacademy.com
Vehicle(s)
2025 RR
Use a soap that can dry on the paind and when re-wetted will rinse and use a spray drying aid. I wash my truck here in FL all the time in the sun. Keep it wet. If you do get water spots, get a water spot remover if needed.
 

scuba mike

Well-Known Member
First Name
Mike
Joined
Feb 7, 2026
Threads
4
Messages
107
Reaction score
74
Location
Southern Calif
Vehicle(s)
2025 Ranger Raptor
Occupation
Hvac Job Foreman
rinse, wash, rinse again with di water lap around the block towel dry what ever is left over..
 

Bill W

Well-Known Member
Joined
Feb 28, 2026
Threads
6
Messages
84
Reaction score
98
Location
SoCal
Vehicle(s)
2025 XLT Ranger 2.7
Occupation
Retired
Like above. Rinse, wash, rinse. Then use leaf blower for most water removal. (Ego) Then spray with battery garden sprayer loaded with di-water and blow that water off.again. That DI water works really well for shine.
 

Sponsored

superj

Well-Known Member
First Name
Jason
Joined
Feb 8, 2025
Threads
43
Messages
3,858
Reaction score
3,673
Location
Corpus christi texas
Vehicle(s)
2024 ford ranger, 2019 wrangler, 2018 mazda3
Occupation
Retired
Or just wash it and go watch TV when done. Don't worry about possible spots or dirt since it's inevitable.
 
 







Top