Ford performance catch can

[rrmarsh]

I installed the ford performance air oil separator kit aka catch cans for a 2025 Ranger raptor with a late year build date and they fit perfectly on the listing it says it won’t fit but it dose incase any one wants to order them

Sponsored

 

[RonM_TX]

I installed the ford performance air oil separator kit aka catch cans for a 2025 Ranger raptor with a late year build date and they fit perfectly on the listing it says it won’t fit but it dose incase any one wants to order them

Thanks for the info. I couldn't understand why it would fit as there appears to be no changes.
My 2025 was built a day after the cut off date that Ford listed. Was holding off until the issue was clarified.

 

[rrmarsh]

Thanks for the info. I couldn't understand why it would fit as there appears to be no changes.
My 2025 was built a day after the cut off date that Ford listed. Was holding off until the issue was clarified.

Your good to get it if you want it it’s a tight fit on the driver side with a ac line but it shouldn’t hit havnt really put to much miles to confirm that but if it dose hit a 3m foam pad or something like that would be more than enough

 

[Kian]

Does MY26 already come with this installed? Or do I need to purchase this..?

 

[superj]

Does MY26 already come with this installed? Or do I need to purchase this..?

It's not installed from the factory. Oems feel the normal vehicle owner won't remember to drain these since some don't remember to check fluids, tire pressure, or even change oil

 

[RonM_TX]

Your good to get it if you want it it’s a tight fit on the driver side with a ac line but it shouldn’t hit havnt really put to much miles to confirm that but if it dose hit a 3m foam pad or something like that would be more than enough

How do you drain it. Hard to tell from the pictures.

 

[rrmarsh]

How do you drain it. Hard to tell from the pictures.

To drain them you’ll remove the 2 hoses going into the catch can pull it off the bracket and undo the 3 bolts that hold the lid of the catch can

 

[superj]

Wow, that's a lot of work. All the after market I have ever used either had a drain valve or you just unscrewed the bowl

 

[rrmarsh]

It’s not to much it’s 3 bolts and two hoses

Sponsored