Ford Performance LED Headlights

[jmt8706]

As far as I know for my 2024 Lariat they move when they are calibrating but not when you are moving. The Lariat and Raptor have a dedicated turn signal light that comes on. There is a video of it on here.

Interesting. I assumed they were like the F150 lights that move left and right when the wheel turns.

Sponsored

 

[daytoncarter]

Interesting. I assumed they were like the F150 lights that move left and right when the wheel turns.

The headlights do turn with the steering wheel CACTUSGREYFX4's Ranger may be broken, or some setting is off.

 

[CACTUSGREYFX4]

The headlights do turn with the steering wheel CACTUSGREYFX4's Ranger may be broken, or some setting is off.

What setting do you have to adjust?

Found it in manual I don't know if it's on or off will check tomorrow when I back in truck.

 

[Blue_Raptor]

I am not doubting testimonials here but I just checked and my vehicle settings (sync center screen) and there is no toggle for adaptive lights. My headlights are set to auto so maybe they just do it? I didn’t set the lights to on and then check again though.

 

[daytoncarter]

I am not doubting testimonials here but I just checked and my vehicle settings (sync center screen) and there is no toggle for adaptive lights. My headlights are set to auto so maybe they just do it? I didn’t set the lights to on and then check again though.

Maybe the toggle is for the matrix function, not the swiveling function, but you can read more about the two here: https://www.ranger6g.com/forum/thre...24-crowdsourced-spreadsheet.12611/post-198350


Your headlights should turn with the wheel from stock, but since it's a US built truck, not use the matrix function unless enabled.

 

[CACTUSGREYFX4]

So I checked maybe because I am in Canada and not USA I don't have the adaptive lighting function in my settings to turn off or on.

 

[Bonder]

So I checked maybe because I am in Canada and not USA I don't have the adaptive lighting function in my settings to turn off or on.

I am also in Canada and do not have this option (I know the manual shows it as well). I have not found a Forscan setting listed in the spreadsheet that enables it yet.

If someone knows the setting, that would be great.

 

[jmt8706]

Around 800 miles on my truck now, and for the first time this morning, they did the calibration movements.

 

[CACTUSGREYFX4]

Around 800 miles on my truck now, and for the first time this morning, they did the calibration movements.

Mine does it 99% of the time, if it doesn't then my high beams don't work so next time I stop I have to restart the truck so the computer reboots.

 

[ShadowDragon24]

So I checked maybe because I am in Canada and not USA I don't have the adaptive lighting function in my settings to turn off or on.

our trucks are built in the states. Michigan builds all north American rangers. you can enable the matrix"glare free" lighting in forscan. I did on my xlt led reflector lights. didnt work, cuz missing everything for it. but I was able to see the toggle on the screen and stuff.

its not in the asbuilt. its in the easy mode programming one.

 

[CACTUSGREYFX4]

our trucks are built in the states. Michigan builds all north American rangers. you can enable the matrix"glare free" lighting in forscan. I did on my xlt led reflector lights. didnt work, cuz missing everything for it. but I was able to see the toggle on the screen and stuff.

its not in the asbuilt. its in the easy mode programming one.

I don't have Forscan.

Sponsored