FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[MudModeEngaged]

Tried enabling glare free high beams tonight on my 26 Raptor. Tried twice and each time I ended with 4 diagnostic codes, so I rolled back the changes.

DTCs were:

pscm - U023A:00-28 (lost communications with image processing
module A)
RCM - B00DF:4A-08 (passenger restraints disable switch - incorrect component installed)
HCM - U2101: 00-08 (control module configuration incompatible)
IPC - U0415:00-08 (invalid data received from abs control module)

Not sure what the issue is but it feels like something has to have changed?

Sponsored

 

[NM Mike]

A big shout out to @craigc for putting the spreadsheet out, and to everyone that has contributed to this thread. You are all awesome. This is a long thread with a lot of minutiae to wade through, but for those ppl looking to run Forscan the first time, I recommend reading it. And for God’s sake, please back up your modules BEFORE you make your changes.
Just an observation after making several changes on my 25 XLT. Some of these changes will throw DTC codes. In my case, everyone of them cleared and have not returned. Its probably a good idea to reset any codes after each change you make, if the code won’t clear, then you know which change to undo if that’s what you want to do. I’m not trying to come across as some forscan guru. I’m new to this software and making changes to my truck with software like this. But all of the work you all have put into this thread made it pretty straightforward. Thank you all

 

[NM Mike]

Have any of you played around in the ACM module? I have the 12” center display, but the standard BO sound system. The eq only has 3 bands. I was looking on the spreadsheet and saw there are a dozen eq options, so I thought I’d try and get a eq with more bands.
In the ACM module, 727-01-02 xxx* the as built had 1. I first tried 9. I still only had 3 bands. Then tried C. Still only 3 bands. While doing all of this, I was listening to Sirius on the radio. After the first change, I had no volume on the radio, but didn’t snap until trying the second time. I thought, oh great, I’ve bumbled this up. So I reloaded my backup. Still no volume from the radio. Also all of my radio presets weren’t displaying. Just SDxx. I swapped to FM, and my preset FM channel had volume. Back to sirius. Still nothing. I assume I lost my sirius account info in the stereo.

I shut down forscan and started googling how to set up my sirius acct in the truck. I turned the key off, went in the house. After getting my account info, I went back to the ranger, started it up and sirius was working fine, and my presets weren’t back. Long story short, I wasn’t sucessfull in getting another eq to display and my radio is working properly. lol. But a heads up, you might temporarily lose your sirius radio while changing things in line 727-01-02

Sponsored