List of 2024 Ranger U.S. Aftermarket Accessories

[LLCCPA]

Installed my cover and fits perfect

Do you get any water intrusion around the tailgate?

Sponsored

 

[Mikr9]

Anyone find any side marker lights that fit? Last gen. are clearly too wide.

 

[Rapture2423]

Do you get any water intrusion around the tailgate?

I would imagine he does. The tailgate D seal on the cover does not look far enough forward to make contact with the tailgate.

I also think BAK's measurements are just a tad shy off for the Ranger. Everyone's leaks

 

[CACTUSGREYFX4]

Anyone find any side marker lights that fit? Last gen. are clearly too wide.

Looking for those too only found ones up to MY 22.

 

[Bt_okst]

I would imagine he does. The tailgate D seal on the cover does not look far enough forward to make contact with the tailgate.



I also think BAK's measurements are just a tad shy off for the Ranger. Everyone's leaks

Trade offs for ease in use, rolling up as it does, staying down when you shut tailgate, etc. I find it to be plenty water tight for my purposes. Unless going through high pressure car wash or heavy, heavy rain, it stays dry except around corners.

Some roll back tops have to be rolled back to close tailgate. I found that though they might be more water tight, having to do that every time was a pain in the a--.

 

[Omega]

Do you get any water intrusion around the tailgate?

There is a tiny bit but so far nothing that has bothered me

 

[SWO Ranger]

https://bisontonneaucovers.com/coll.../ford-ranger-flip-back-tri-fold-tonneau-cover

Does anyone have experience with these? I'm sure there is a compromise somewhere with that price.

I have one. A couple of small issues. I had to get different clamps as the supplied ones would not stay in place. Also the ends of the rails were poorly finished - fixed with a file. It has the option of folding up against the back glass if you have something large in the bed.

 

[DanTheMan]

I have one. A couple of small issues. I had to get different clamps as the supplied ones would not stay in place. Also the ends of the rails were poorly finished - fixed with a file. It has the option of folding up against the back glass if you have something large in the bed.

Thanks for the info. My alternative locally is a Bakflip Mx4 for $1800ish. I was just checking to see if they are worth whatever hassle is included for the reduced price tag.

 

[jedadiah]

I called their parts number and the representative was a little perplexed by the "could take up to 14 days for fulfillment" part. Her advice was to wait those two weeks and if nothing had changed, to then cancel. She said it was possible that the message shouldn't be there for back-ordered parts and it could be a glitch, which she said she'd report.

My order shipped on day 14.

 

[jedadiah]

My order shipped on day 14.

and arrived today.

 

[jrRaptor]

and arrived today.

Did you get the J-braces too? Should be free + free install since you bought a Ford cover. I got the exact same cover but Dealer not sure if they can get the install under warranty since it's not a Ford cover. But they're trying.

 

[jedadiah]

Did you get the J-braces too? Should be free + free install since you bought a Ford cover. I got the exact same cover but Dealer not sure if they can get the install under warranty since it's not a Ford cover. But they're trying.

I ordered them on my own from Ford. I figure if Ford ever decided to pay for these, that I can get reimbursed. I've only seen the warranty mentioned with truck caps. I haven't installed them yet. I won't use the rack on the cover until I do. I fit it yesterday for fun and pictures.

 

[Ranger Dave]

Just a note to all 6 Gen Ranger owners, the Embark (Retrax) tonneau cover for 2023 and older trucks will NOT, repeat, will NOT fit a 2024 model (from my review of 24 Raptor and standard 24 Ranger the beds appear to be the same) so make sure to only buy a cover for a 24 Ranger. We ordered an Embark tonneau cover, supposedly for a 24 Ranger Raptor, and it was approximately 2" short when installed (we are assuming that the wrong year was sent out in error by Ford Parts as this was a dealer installed option, not by Ford at the factory in Dearborn). Our Dealer , who was fantastic by the way, tried everything to make it work but there was no way it would fit without leaving a major gap. So assuming it was just a mix-up at Ford Parts we have reordered the cover and hope for a better result this time - the part numbers are different on Ford's website for the 23 and older vs the 24 but I can't check what the "old" part number was as the original tonneau cover was removed and left at the dealership 2,400 miles from where we live... I will say that the road trip to bring the vehicle home was epic (hospitality of the Dealership was off-the chart, incredible scenery, meeting up with friends along the way home and dodging a few tornadoes in Texas) making this an incredible experience in large part by the Ranger Raptor's performance which exceeded expectations (I drive a lot of nice vehicles but we did not expect sports car performance from a truck!!!). I hope to update everyone after the NEW cover arrives and hopefully it fits this time.

 

[jvunc]

The correct ref from retrax support for Ford Ranger 2024 is T-80338 for global maket.
I've seen that this model is available on many suppliers (realtruck etc...).
Hope this help.

 

[CherryCoke]

Just a note to all 6 Gen Ranger owners, the Embark (Retrax) tonneau cover for 2023 and older trucks will NOT, repeat, will NOT fit a 2024 model (from my review of 24 Raptor and standard 24 Ranger the beds appear to be the same) so make sure to only buy a cover for a 24 Ranger. We ordered an Embark tonneau cover, supposedly for a 24 Ranger Raptor, and it was approximately 2" short when installed (we are assuming that the wrong year was sent out in error by Ford Parts as this was a dealer installed option, not by Ford at the factory in Dearborn). Our Dealer , who was fantastic by the way, tried everything to make it work but there was no way it would fit without leaving a major gap. So assuming it was just a mix-up at Ford Parts we have reordered the cover and hope for a better result this time - the part numbers are different on Ford's website for the 23 and older vs the 24 but I can't check what the "old" part number was as the original tonneau cover was removed and left at the dealership 2,400 miles from where we live... I will say that the road trip to bring the vehicle home was epic (hospitality of the Dealership was off-the chart, incredible scenery, meeting up with friends along the way home and dodging a few tornadoes in Texas) making this an incredible experience in large part by the Ranger Raptor's performance which exceeded expectations (I drive a lot of nice vehicles but we did not expect sports car performance from a truck!!!). I hope to update everyone after the NEW cover arrives and hopefully it fits this time.

Any updates? Been considering buying this with all the points I have.

Sponsored