Raptor1996
New Member
Anyone know of an underbed air compressor available in the US market yet? Really wanting to have on board air...
Sponsored
I called their parts number and the representative was a little perplexed by the "could take up to 14 days for fulfillment" part. Her advice was to wait those two weeks and if nothing had changed, to then cancel. She said it was possible that the message shouldn't be there for back-ordered parts and it could be a glitch, which she said she'd report.Or maybe not. After I ordered, Ford sent an email sating the part is backordered. How about not selling a part you don't have in stock?
Any plans for lighting brackets, ideally A-Pillar and Behind grille lightbar?We have a ton of new parts for the Ranger Raptor released and more in the works all the time. Please check it out and see if we have what you guys want, or let me know if you are looking for something else that you cant find and maybe we can make that too. Open to concepts and love to collaborate with enthusiasts to make cool stuff.
https://www.foutzmotorsports.com/collections/ford-ranger-raptor
Dash mount is going to be really hard with the way the stock dash is in these trucks.Any plans for lighting brackets, ideally A-Pillar and Behind grille lightbar?
Also thinking about a dash mounting system like exists for the Bronco.
How about a gas tank plate?Dash mount is going to be really hard with the way the stock dash is in these trucks.
we have a stock front bumper light bar mount in the works similar to what we do for the F150 Raptor and Bronco Raptor. That should be ready in the next few weeks also. And yes we will do an A-pillar mount.
might be able to do that. We just did one for the bronco and the mounting and stuff is very similar. I will look at that one for sureHow about a gas tank plate?
I installed the Revolver X4s and fit was perfect. I also have tempered glass screen protector to install after ceramic and interior protection is completed.With the 24’s being so new to the US market, I thought I would start a thread to document accessory availability for anyone trying to find and order parts.
the Australian market has a lot of parts available as the new gen has been available since 2022. No confirmation of fitment or shipping availability.
I can keep this post updated if others comment below.
If you have purchased any of these, please post pictures and reviews- I will add a note on any products that are of poor quality to warn the group
Available parts:
Ford Misc accessories:
- https://accessories.ford.com/all?facet=facets.100509.value.raw:"Ford_Ranger_2024"&orderBy=4
- Amazon screen protectors: https://a.co/d/hNFYCTP
- Amazon center console tray: (confirmed fit by OP) https://a.co/d/9Kduga7
- Amazon gear shifter panel cover
https://a.co/d/7trqZ1m
- tonneau covers: https://realtruck.com/c/exterior-accessories/tonneau-covers/v/ford/ranger/2024/
- 35 gallon RR fuel tank
https://longrangeamerica.com/product/ford-ranger-raptor-2023-35g-replacement
- Raptor branded aluminum hitch cover
https://www.amazon.com/dp/B00MI5Q0HM?psc=1&ref=ppx_yo2ov_dt_b_product_details
- generic vehicle 2” antenna replacement (confirmed fit by OP)
https://a.co/d/dx7Wa2T
- generic storage bags that fit in glove box and under rear seat (confirmed fit by OP)
https://a.co/d/9aqPwok
Toppers:
LEER-
https://www.leer.com/products?cclcl=en_US&cartId=2d5bb935-60d9-4e15-bf9b-b1e724c8f49f
A.R.E. - https://www.4are.com/mobile/product/caps.php
International parts (not confirmed to fit)
- wildtrack style roof bars - https://www.ebay.com/itm/126197502128
- ARB Australia brush guards, bumpers, etc. https://www.arb.com.au/ford-ranger-next-generation-2022-present/
- aux switch panel above lights panel
https://www.micktighe4x4.com.au/products/next-gen-switch-panel
-top of dashboard mounted aux panel
https://www.precisionoffroad4x4.com.au/products/switch-panel-to-suit-next-gen-ford-ranger-everest
Not available:
- custom fit floor mats
- weathertech
- ARB USA
- brush guards, bumpers, skid plates
- tonneau covers: diamondback
- black horse bumpers, etc
-
Another item that would be nice is a set of stout frame mounted rock sliders that are angled. I plan to buy your skid plates but it would be nice to get the sliders, skid plates, gas tank plate, and diff protector all from one source.Dash mount is going to be really hard with the way the stock dash is in these trucks.
we have a stock front bumper light bar mount in the works similar to what we do for the F150 Raptor and Bronco Raptor. That should be ready in the next few weeks also. And yes we will do an A-pillar mount.
I dont have any rock sliders / side step stuff in planning right now.Another item that would be nice is a set of stout frame mounted rock sliders that are angled. I plan to buy your skid plates but it would be nice to get the sliders, skid plates, gas tank plate, and diff protector all from one source.
Thank you for the update! I’d anticipate this is 1-2 hours of labor, so an extra ~$200 for an install if not a little more.I just saw one of my Leer dealers today. He said that LEER is including the Box Reinforcement Kit with the Cap purchase. I'm looking at the 100XL or 100XR. He didn't sound happy with the issue that Ford has presented to him.
He will be installing his first Cap on a 2024 Ranger in a week or two. This will be at no additional cost, as a test case. But he said it doesn't look easy & may have to adjust his prices after this install.
Yes....https://www.ranger6g.com/forum/threads/bed-rattle-and-crack.8630/can Anyone chime in about the international market trucks and if they have the same problem with these J brackets?
WOW. That is actually unbelievable from an engineering standpoint. I can understand something heavy on the roof of the cab causing issues, but they literally designed the bed rails to support a cap, wild they wouldn’t design the chassis to…Yes....https://www.ranger6g.com/forum/threads/bed-rattle-and-crack.8630/