Lower control arm bolt torque spec?

[tisser07]

All, I bought the Foutz lower control arm frame sliders. The install requires loosening the lower control arm bolt, rotating the flag out of the way, and retorquing with the truck on the ground. I have checked a few AI versions and they claim torque of that nut is between 350-380ftlb. Does anyone know if this is accurate or have a source to confirm this?

Sponsored

 

[CaptAngry]

It is actually 550nm, which is just over 400ft.lb

It is a big honkin chonkin bolt. I just wrenched on it with a breaker bar until I couldn't move it anymore.

 

[tisser07]

It is actually 550nm, which is just over 400ft.lb

It is a big honkin chonkin bolt. I just wrenched on it with a breaker bar until I couldn't move it anymore.

Thanks, I had actually come across that data point as well. Really appreciate you confirming. I may need to pick up a torque multiplier.

Why did you remove that bolt?

 

[CaptAngry]

Why did you remove that bolt?

I needed to remove the strut assemblies to install leveling spacers

 

[yoopercharged]

I needed to remove the strut assemblies to install leveling spacers

Are you referring to the lower shock bolt? I think OP is referring to the rear LCA to frame bolts?

 

[CaptAngry]

Are you referring to the lower shock bolt? I think OP is referring to the rear LCA to frame bolts?

Huh, you are right. I wasn’t actually reading the words…

 

[tisser07]

I'm waiting for Foutz to let me know the torque spec. I'll share it here once I find it. AI has been no help with this.

Sponsored