What did you do to your Ranger Raptor Today?

[FordDawg]

they are the ones labeled “for redback series”. you can find them here:

https://accessories.ford.com/ranger-2024-molded-splash-guard-front-for-redback-series-r1wz16a550ca

https://accessories.ford.com/ranger-2024-molded-splash-guards-rear-for-redback-series-r1wz16a550da

source: I ordered these exact ones about a month ago and can confirm that they are the same ones posted by OP

How far down below the body do they extend? From the pic they seem pretty low profile, which is what I would want.

Sponsored

 

[Top Fuel Friday]

they are the ones labeled “for redback series”. you can find them here:

https://accessories.ford.com/ranger-2024-molded-splash-guard-front-for-redback-series-r1wz16a550ca

https://accessories.ford.com/ranger-2024-molded-splash-guards-rear-for-redback-series-r1wz16a550da

source: I ordered these exact ones about a month ago and can confirm that they are the same ones posted by OP

I ordered them from forddiscountparts.com.

 

[pablo94sc]

Ordered some off road gear (recovery strap, inflator, traction boards...) and a soft tri-fold tonneau cover.

 

[G L Rockwell]

I got my grill lights installed today. They should look better at night but it's not dark out yet.

Can you share pics, links and what was involved to install please good sir ?

 

[cc1999]

Phase 1 of getting my old Colorado’s headache rack modified to fit on the Ranger Raptor is now complete. Picked it back up from the fab shop, pulled the wire harness out and dropped it off at the powder coating shop.

 

[cc1999]

My J-braces finally shipped yesterday.

Been on backorder the past couple weeks.

The truck goes into my local custom shop tonight for the clear bra and side step removal, and vinyl wrap and cladding will get installed below the doors to protect the belly from rock ships since the steps are coming off.

 

[DinoBirdClaws88]

Powder coated wheels/Skid plate, paint match hub caps/rear Raptor emblem, Raptor sticker delete, 360 Tint, Front bumper painted black, Paint protection film, 3rd brake light aftermarket (tinted).

 

[NASSTY]

Can you share pics, links and what was involved to install please good sir ?

Unfortunately, I didn't take any pics. It was really easy. You have to remove the plastic cover on top of the radiator support so you can get at the wires once you feed them through. There are (I think?) 13 push pin clips that hold the cover to the top of the radiator support. You must drill a small hole in each of the 3 pockets in the grill to feed the wires through. You can either run the ground wire to the inner fender or the negative terminal of the battery. I ran the power wire to the #1 aux. switch for now. I want to find a wiring diagram so I can tap them into the parking lights so the grill lights come on with the parking lights and headlights.
While you have the plastic cover off the radiator support it's a good time to adjust your hood latch if you have difficulty closing your hood. Mine closes easy now.

 

[Chassis N2531]

Unfortunately, I didn't take any pics. It was really easy. You have to remove the plastic cover on top of the radiator support so you can get at the wires once you feed them through. There are (I think?) 13 push pin clips that hold the cover to the top of the radiator support. You must drill a small hole in each of the 3 pockets in the grill to feed the wires through. You can either run the ground wire to the inner fender or the negative terminal of the battery. I ran the power wire to the #1 aux. switch for now. I want to find a wiring diagram so I can tap them into the parking lights so the grill lights come on with the parking lights and headlights.
While you have the plastic cover off the radiator support it's a good time to adjust your hood latch if you have difficulty closing your hood. Mine closes easy now.

Do you have a link to the product you installed?

 

[cc1999]

Do you have a link to the product you installed?

I am pretty sure there is just the one kit out there with varying sources. Or possibly just same source using various names. LOL
There is about a dozen listing on Ebay for the same kits.

I did order mine today from one of the sources that showed to be shipping form the USA, but I do have my doubts about that actually being the case.

https://www.ebay.com/itm/155906057960

That one now shows out of stock.

But there is a lot more listings for the same lights.
This one shows to also be shipping from the City of Industry USA. LOL
This listing shows 3 in stock.
https://www.ebay.com/itm/2353433740...Lr5JFog3am6NvtnyRmKvlc+Q==|tkp:Bk9SR6SSlZ_0Yw

 

[Ag3ntC00p3r]

My eBay marker lights arrived in about 10 days. Just waiting for my adhesive promoter to arrive to install them and the tailgate RANGER lettering.

 

[Bt_okst]

Had my Raptor grill lights from ebay installed today. Hooked up to aux 1 switch so if they went wonky it didn't effect any other equipment.

 

[Tr1tium]

Had my Raptor grill lights from ebay installed today. Hooked up to sux switch so if they went wonky it didn't effect any other equipment.

I’m looking for info on how to install these I bought these same type lights off of eBay, but I cannot figure out how to install them. I’m not very good at electric stuff.

 

[Rapture2423]

Knocked a lot out today.
Tough skins inserts, OEM raptor (ford performance mud flaps), Fords Vehicle Security System to have an alarm, and black one piece lugs vs the silver two piece junkers Ford uses.

Does the truck not already come with the anti theft alarm system??

What part number is that? Did it need to be dealer installed?

 

[cc1999]

Had my Raptor grill lights from ebay installed today. Hooked up to sux switch so if they went wonky it didn't effect any other equipment.

Looks great .
‘Ordered same kind Raptor lights off eBay right after I ordered the headlight trim bezels this morning.

Please post some instalation pics if you get a chance.