Would you buy a fitted insert for this wasted dash cubby? 2024+ Ranger

[YeahNahRaptor]

I’ve always thought the small cubby above the headlight controls on the driver’s side was kind of wasted space.

I’m working on a 3D-printed insert designed specifically for this area. The plan is for it to fill the entire opening, sit almost flush with the surrounding trim, and look as OEM as possible rather than like something stuck into the pocket.

I’m currently developing a version that hides a Kicker CXARC bass controller behind the panel, leaving only the knob visible.

Once the basic cubby geometry is finished, it would be easy to make different versions using the same factory-fit housing. Ideas so far:

• Coin organizer with removable rubber/TPU anti-slip liner
• Kicker bass knob flush mount
• Other bass-controller versions
• USB-C / USB charging
• AUX switch panel
• Voltage/gauge mount
• Card/toll-pass holder
• Small storage tray with rubber liner
• Blank OEM-style panel
• Custom configurations

The plan would be heat-resistant material such as ASA, not PLA, with an OEM-style black texture.

Before I spend the money on scan data and printing equipment, I’m curious whether other Ranger owners would actually want these.

What would you use this space for?

Concept illustration only: The image below shows possible designs, not finished or tested products. Fit, materials, finish and functionality still need to be validated.

Quick follow-up for everyone who voted here — I’ve put up a separate pricing poll so I can get a realistic idea of what people would actually pay before I start spending money on scanning, prototyping and printing equipment.

If you’re genuinely interested in one of these, I’d really appreciate a vote there too:

https://www.ranger6g.com/forum/thre...4-ranger-dash-cubby-insert.33392/#post-503956

This should help me figure out whether it makes sense to take this beyond just making one for my own truck.

Sponsored

 

[Intercontinental_Ranger]

This is awesome!

I’m definitely interested in the voltage gauge and/or the aux switch version.

Consider mirroring the model for the other side, for those of us without the advanced trailer tow package controls

Would pay a bit extra for a 20-30% gyroidal infill too!

 

[YeahNahRaptor]

This is awesome!

I’m definitely interested in the voltage gauge and/or the aux switch version.

Consider mirroring the model for the other side, for those of us without the advanced trailer tow package controls

Would pay a bit extra for a 20-30% gyroidal infill too!

Thanks — this is exactly the kind of feedback I was hoping for.

The voltage gauge and AUX-switch versions are definitely on the list once I get the base cubby geometry finalized.

The mirrored version for the opposite side is a really good idea too. I’m going to look into whether that side uses the same mirrored geometry on trucks without the advanced trailer-tow controls.

For construction, I’m planning on using a heat-resistant material like ASA and focusing on proper wall thickness, fit and strength. I’ll test different infill patterns too, including gyroid, before settling on the final production setup.

Appreciate the input — keep the ideas coming.

 

[bgn]

An aux switch gets my vote. I've seen no accessories sold stateside for them.

 

[YeahNahRaptor]

Don’t forget to vote guys!

 

[NM Mike]

There are several good options. Just a thought, I believe that this cubby/space is the same on raptor/lariat/xlt/xl models. Your concept illustration labels this as for the ranger raptor models. You might want to drop the raptor part, so you don’t inadvertently lose out from non raptor ranger owners.

 

[YeahNahRaptor]

There are several good options. Just a thought, I believe that this cubby/space is the same on raptor/lariat/xlt/xl models. Your concept illustration labels this as for the ranger raptor models. You might want to drop the raptor part, so you don’t inadvertently lose out from non raptor ranger owners.

Good point, Mike—thanks! I’m developing it around my Raptor, which is why the concept image says that, but I’d definitely like to include XL, XLT and Lariat owners too.

I’ll update the wording. Before offering anything for sale, I’ll confirm fit across the trims rather than assume they’re identical. Feedback from all Ranger owners is welcome

 

[NM Mike]

The accessories switches panel would be sweet for us non raptor owners. You raptor guys get several factory switches. For the other trims, we have to get creative to add switches, or spend entirely too much for the ford switches.

 

[STEVE_K]

Some cool ideas! I like the card holder, would be useful for the couple coffee shacks I hit up. Might even be able to add Raptor, XLT, and stuff like that to it as well.

Will be watching to see what comes of this!

 

[b-smi91]

Can never have enough USB charging ports. Aux switch options would be useful too.

 

[25Dsand]

I voted for 3 that I would use but all of them would work for specific people nice job

 

[Odb6909]

Like the holder and the USB..

 

[Geo8866]

I had to go out and check, since I had no idea that space even existed. It's so small, I never even noticed it. I'm not sure what you could do with such a small space. Although I voted for a USB-C port, I assume putting anything electrical in there would require some wiring work that may be beyond the expertise of many, including me.

 

[EEYORE]

#10. Is my favorite
#4. I can see useful.

Everything else is pointless.

aux switches?
We already have them on the raptor, but I can see a need for them on a base or xlt ranger.

coin holders are lame.

 

[Ryan Plain]

Bass knob, hands down. If you decide to make it, consider at least 1 sold!

Sponsored