Instrument cluster upgrade from 8" to 12" using Forscan (my DIY)

[itsyaboi]

Hey guys first time posting here so apologies if in the wrong section, figured id throw up a post as when i was doing research to carry out the upgrade there wasnt must specific info, recently carried out a cluster upgrade on my next gen ranger wildtrak v6 instrument cluster from the standard 8 inch unit to the larger 12 inch from a wrecked raptor as there was no specific details on the requirements of what to do i figured id put up a thread on what worked for me and others can add in if they have any tricks or changes that work for them, im self taught on forscan so please forgive if i use the wrong terminology
Sourced a low mileage cluster from a wrecked raptor

*Im unsure if there is a better way to do this, im self taught with forscan just putting what i done to get working*

1 - backed up standard 8 inch cluster asbuilt data

2 - remove 8 inch cluster and replace with raptor one

3 - backed up raptor cluster asbuilt data

4 - flashed raptor cluster with standard cluster asbuilt data
5 - enabled baja mode and disabled eco mode in abs module

6 - done a cluster odometer flash so dash matches my cars klms ( please note from what i can find you can only flash upward klms not under I grabbed a cluster with 10k on the clock and flashed it to match my 48k so grab a cluster accordingly )

At this point for mysef cluster was working but tachometer was not unsure if it will be the case for everyone but i had to then enable tacho in the ipc configuration

Noteable mentions unsure if this will be the case for everyone but just my experience - ( australian ranger V6 wildtrak diesel)

I had to enable a number of items in the ipc configuration to gain full functionality not sure why they were disabled (possible that the second hand cluster had changes made prior to my purchase) -
had to enable door open warning
Had to then enable a few gauges for the full raptor measurments page and configurable my gauges options
Also turned on dpf gauge as my wildtrak is a v6 diesel

Only thing i havent been able to get to work is on my previous 8 inch cluster i was able to turn on and access menus for cruise control, lighting and such from the centre cluster / radio settings and access through the instrument cluster / ipc from the steering wheel buttons first world problem as on a standard ranger you cant so this anyway but if anyone has any pointers or fixes for that please let me know

Sponsored

 

[ChronciallyChronic]

Hey guys first time posting here so apologies if in the wrong section, figured id throw up a post as when i was doing research to carry out the upgrade there wasnt must specific info, recently carried out a cluster upgrade on my next gen ranger wildtrak v6 instrument cluster from the standard 8 inch unit to the larger 12 inch from a wrecked raptor as there was no specific details on the requirements of what to do i figured id put up a thread on what worked for me and others can add in if they have any tricks or changes that work for them, im self taught on forscan so please forgive if i use the wrong terminology
Sourced a low mileage cluster from a wrecked raptor

*Im unsure if there is a better way to do this, im self taught with forscan just putting what i done to get working*

1 - backed up standard 8 inch cluster asbuilt data

2 - remove 8 inch cluster and replace with raptor one

3 - backed up raptor cluster asbuilt data

4 - flashed raptor cluster with standard cluster asbuilt data
5 - enabled baja mode and disabled eco mode in abs module

6 - done a cluster odometer flash so dash matches my cars klms ( please note from what i can find you can only flash upward klms not under I grabbed a cluster with 10k on the clock and flashed it to match my 48k so grab a cluster accordingly )

At this point for mysef cluster was working but tachometer was not unsure if it will be the case for everyone but i had to then enable tacho in the ipc configuration

Noteable mentions unsure if this will be the case for everyone but just my experience - ( australian ranger V6 wildtrak diesel)

I had to enable a number of items in the ipc configuration to gain full functionality not sure why they were disabled (possible that the second hand cluster had changes made prior to my purchase) -
had to enable door open warning
Had to then enable a few gauges for the full raptor measurments page and configurable my gauges options
Also turned on dpf gauge as my wildtrak is a v6 diesel

Only thing i havent been able to get to work is on my previous 8 inch cluster i was able to turn on and access menus for cruise control, lighting and such from the centre cluster / radio settings and access through the instrument cluster / ipc from the steering wheel buttons first world problem as on a standard ranger you cant so this anyway but if anyone has any pointers or fixes for that please let me know

View attachment 73094

You also have engine and battery warning lights present.

 

[superj]

wow, thats awesome you figured all that out on your own. i can't help with any of your last issues but i wish i had that cluster

 

[fordgt]

There is a thread on this previously where they were sourcing them from Australia. As I recall, it was somewhere around $1500. Guy could apparently match your odometer settings. Too rich for my blood though.

 

[itsyaboi]

You also have engine and battery warning lights present.

Photo is ignition on engine off mate no warnings present once started

 

[CarTuner]

This is awesome! Any further details on the installation side?

 

[Silverwolfuk]

I’ve just done my V6 wildtrak, used a breaker sourced 3.0 raptor clock set.
It worked without any changes but is now coded, works really well.
Only thing I can’t get working (yet) is oil pressure gauge and still have the raptor page, which is pretty useless.
So I don’t select them in displays

Sponsored