vagabond102
Active Member
- First Name
- Tracy
- Joined
- May 20, 2025
- Threads
- 2
- Messages
- 30
- Reaction score
- 20
- Location
- Portland, OR
- Vehicle(s)
- 2025 Ranger Lariat FX4 2.7L
Just had a Viofo a329s installed. They really needed to release the HK6 wiring kit (required for the advanced parking mode and voltage monitoring). I got the older install kit, so can't use the advanced features. Not the biggest issue, but annoying as I'm not changing it out.
I found out the hard way that if you try using the parking modes that don't work with the older kit, funky things happen. (Random powercycling, cam boots on truck wake, but when you start it, it shuts off the cam)
I'll say, I'll never have a shop install them again. The install was the same cost as the frigging cam. Someone made bank off 45 minutes of work. I just am not confident I wouldn't damage the interior and wiring isn't my thing. I'll take the chance next time.
Now that I have the issues figured out, it's a good cam, but may have gone the Thinkware U3000 route next time. It's parking features are superior.
I found out the hard way that if you try using the parking modes that don't work with the older kit, funky things happen. (Random powercycling, cam boots on truck wake, but when you start it, it shuts off the cam)
I'll say, I'll never have a shop install them again. The install was the same cost as the frigging cam. Someone made bank off 45 minutes of work. I just am not confident I wouldn't damage the interior and wiring isn't my thing. I'll take the chance next time.
Now that I have the issues figured out, it's a good cam, but may have gone the Thinkware U3000 route next time. It's parking features are superior.
Sponsored