Drive Modes mod via Forscan

[Mooncat747]

Tada!

HOW-TO INSTRUCTIONS:

A few of us here do use Forscan. Are you able to post up a guide on how you did this?

This works on the Asian modules, I don't know about US models. Backup everything on forscan before you make changes!

You have to enable "Selectable Drive Modes" and "ECO mode" in the APIM. See photo. Then enable SDM "eco mode" in the ABS module. Then you need to go to the ABS AS BUILT module and change 760-04-05 xxxx-01xx-xxxx.

After that reboot abs module, reboot Apim module. Scan DTC and clear any generated codes.

Sponsored

 

[TheRealSasquatch]

Ok tell us how!

 

[Mooncat747]

Ok tell us how!

The sport mode selection animates too. If you have Forscan and know how to use it, I can show you how.

 

[stuartmunto]

The sport mode selection animates too. If you have Forscan and know how to use it, I can show you how.

A few of us here do use Forscan. Are you able to post up a guide on how you did this?

 

[Mooncat747]

A few of us here do use Forscan. Are you able to post up a guide on how you did this?

This works on the Asian modules, I don't know about US models. Backup everything on forscan before you make changes!

You have to enable "Selectable Drive Modes" and "ECO mode" in the APIM. See photo. Then enable SDM "eco mode" in the ABS module. Then you need to go to the ABS AS BUILT module and change 760-04-05 xxxx-01xx-xxxx.

After that reboot abs module, reboot Apim module. Scan DTC and clear any generated codes.

 

[ag02m5]

Interesting find.

 

[MuleMarine]

Haha...this is fantastic! I'll have to give it a try this week.

 

[superj]

the raptors don't change colors on the screen when changing modes?

i figured they would since my stx does it, though mine is on the gauge cluster since my modes don't show on the center screen

blue for normal
green for eco
red for sport
brown for another and i cannot remember the other colors as i don't use them

 

[DangerRanger7]

Awesome find, they need to release this on U.S. cars already

 

[Mooncat747]

the raptors don't change colors on the screen when changing modes?

i figured they would since my stx does it, though mine is on the gauge cluster since my modes don't show on the center screen

blue for normal
green for eco
red for sport
brown for another and i cannot remember the other colors as i don't use them

Mine all change colors.

 

[sweeks888]

Following ... any one try this on their US Raptor yet, to see if the same settings can be used within FORScan to achieve this?

 

[EzequielArgentina]

@Mooncat747 thanks for sharing, really appreciatte it. Would you mind letting me know how did you do to add the Trail Turn Assist "button" on the screen?

 

[Mooncat747]

@Mooncat747 thanks for sharing, really appreciatte it. Would you mind letting me know how did you do to add the Trail Turn Assist "button" on the screen?

Trail Turn Assist-

APIM NON-ASBUILT - Trail Turn Assist enable/disable.
(This adds the Trail Turn Assist button to the off-road screen)

ABS AS BUILT Module -
Find 760-03-01 change E87C 76** to E87C D6**
(This enables the Trail Turn Assist functionality within the ABS module)

*You can also modify the APIM AS BUILT module if you want to enable the TTA button, but it's easier to just enable it in the menu as I stated above. However, if you'd rather enable it using this second method. Navigate to 7D0-10-02 within the APIM Module. Change the original value to 0000 00A5 00.

 

[sweeks888]

Tada!

HOW-TO INSTRUCTIONS:



This works on the Asian modules, I don't know about US models. Backup everything on forscan before you make changes!

You have to enable "Selectable Drive Modes" and "ECO mode" in the APIM. See photo. Then enable SDM "eco mode" in the ABS module. Then you need to go to the ABS AS BUILT module and change 760-04-05 xxxx-01xx-xxxx.

After that reboot abs module, reboot Apim module. Scan DTC and clear any generated codes.

Ok, ran this procedure, since I'm interested in whether ECO mode would give any better fuel mileage driving around town. Was meticulous in all changes you posted and checked them twice. On my US 2024 Raptor, this is the only change that showed up to Modes that I can tell, plus no ECO mode.
I have one question maybe something I did wrong or am not aware of... when you say to "reboot ABS and APIM modules", I am not understanding what you mean? All I am aware of is Writing to the code once changed and saving log file after. Am I missing something I should have done, please elaborate on "rebooting modules"...?
Thanks... Steve W.

 

[superj]

when you twist the bezel around the tow knob on the center console, you don't have eco as an option?

dude, thats crazy. i thought all the trucks came with normal, eco, and sport, at a minimum.

Sponsored