Has anyone looked into adding the graphics package on a Ranger Raptor?

[Hedder]

All the graphics are matte. Good Luck!

Sponsored

 

[Rufus]

I’ve seen that. Maybe they cut some shapes and overlaid it. Easy to do and cost effer

Who would I go to…any ideas?

 

[rocsteady]

Who would I go to…any ideas?

I would say to call the shops that do vehicle wraps/graphics in general and ask about getting the design customized. Not sure what you thought of mine but adding some red as you mentioned earlier, with some vinyl you order in whatever size you want, is easy to do after the main graphic is installed. Or you could even get the larger graphic and cut pieces out before install, adding in the highlight color after it's on the vehicle. I added my pinstripes after but if I had wanted larger areas of the orange, I would have cut them from a larger piece of the same colored vinly I orderered from RVinyl online.

Wait, does that answer your question? Or were you looking for a specific shop name near us here in the NYC area?

 

[snm928]

I found one on the lot near me, would have ordered twitch graphics (and keypad, which I know I can add).

Anyone look into the ford OEM graphics on ford parts? Finding an online dealer with info on '24's is not easy.

Good both ways, but I took it off.

 

[JWeigel]

I had the full graphics package on my White Raptor. Could have lived with just the Raptor graphic....not all the rest.

I hastely removed everything. Thought maybe the extra could be seperated from the Raptor word....but no....all one graphic.

Can anyone get me the general measurements of overall width and height>

Or if someone knows a spot that this info is online? Did some searching for Raptor Templates and looked here but did not find anything. Even the general overall width and height woudl work.

Thanks

jjw
ND

 

[bossy]

Taking mine off tomorrow.. Too much..

 

[rocsteady]

Taking mine off tomorrow.. Too much..

I would strongly recommend against it, you'll lose about 46 and 1/2 horsepower. Fact. I gained a ton by adding mine and an extra 4hp with the orange highlighted pinstripes.

 

[Jeffola]

I am going to remove the "Raptor" decals.

Looks junky, like what a 16 year old would do.

The graphic is 29" long, sits 1/2" below the body character line and 1/2" forward of the char line by the taillight.

 

[JWeigel]

Thank you so much..... exactly what I needed.


jjw
ND

 

[Jeffola]

Thank you so much..... exactly what I needed.


jjw
ND

No problem. I just removed mine after I measured.

 

[bossy]

Removed. Was kinda easy. Leaves some residue. Wife likes it better. That's worth 50 HP and some torque easily..

 

[Arsenall11]

not a fan of the no graphics, this is so subjective there is no correct answer for all.

 

[T-Rev]

Also a fan of no graphics

 

[rocsteady]

I think it speaks to the overall design that it looks good in almost every color (you know who you are) and with or without the graphics.

 

[Jabberwocky]

I removed mine last week (Shelter Green) except for the little underline on the rear tailgate badge. I purchased a pair of "Raptor" decals but in a different color-way (matte black on gloss black) for a more subtle look. Will post photos once the truck is clean and ceramic coated.

Sponsored