Ranger Raptor - 1.5" front leveling spacers installed

[Aonarch]

Make sure you recalibrate the ride height sensors.

Sponsored

 

[CaptAngry]

Did that. FORScan FTW

 

[25PlatTrem350]

Looks high in the front

I was thinking the same thing. Per both pics it looks to have reverse rake but maybe in person not so much.

I'm thinking the 1.5 front 1.0 rear is what I'll go with on my wife's 25 RR. I think it's better to have a little bit of rake I just don't want as much as it has in factory form. I definitely don't want it to have reverse rake.

 

[NeilSon71]

Same front lift here with perfect level front and rear. 60-61 cm (24") on all 4 corners from center hub to fender.

 

[Bloody run]

That thing looks CHERRY

 

[MI_RR]

Same front lift here with perfect level front and rear. 60-61 cm (24") on all 4 corners from center hub to fender.

What spacer is that? I like the anodizing

 

[NeilSon71]

What spacer is that? I like the anodizing

I'm not sure, it was already installed by the previous owner when I bought it, sorry I can't help!

 

[jacobhorn]

[edit] Apparently it wasn't raining as hard as I thought [/edit]

This is the best I could get right now:

Pretty happy with the result now

Looks great! Do you mind sharing a link to the exact spacers you used? Thank you!

 

[CaptAngry]

These are the ones I used:
https://a.co/d/0dJfqpK4

Not as nice as real GOATs, but it is an aluminum puck. And... $68 vs ~$300

 

[jacobhorn]

These are the ones I used:
https://a.co/d/0dJfqpK4

Not as nice as real GOATs, but it is an aluminum puck. And... $68 vs ~$300

Cool, thank you!

 

[89138]

Same front lift here with perfect level front and rear. 60-61 cm (24") on all 4 corners from center hub to fender.

nice truck, could you share the specs/offset of your wheels?

 

[freakshow999]

Damn nice truck!
What kit did you use?

 

[grose_88]

Here is the comparison for the GOAT 1.5" front spacers if anyone is still on the fence. Wanted to keep a slight rake, which left me with about a 0.5" rake after the lift. Truck on the right in the third pic has the 1.5" strut spacers, while the RR on the left is stock. Also included a few pics of Rokblokz 1.5" 7075-T6 grade wheel spacers, which further improve the overall stance. In the last photo you can see the difference between those offsets as well. 10/10 would do again. Any questions let me know I'd be happy to answer!

 

[freakshow999]

These are the ones I used:
https://a.co/d/0dJfqpK4

Not as nice as real GOATs, but it is an aluminum puck. And... $68 vs ~$300

These are advertised for the 2024-2025 Raptor and when I asked if they would work on the 2026 this is the response I got...

"No, this 1.5" Front Leveling Kit is not compatible with the 2026 Ranger Raptor. The product is specifically designed for 2024-2025 models only.

The 2026 Raptor introduced significant suspension changes—it now uses a forged aluminum double A-arm front suspension with FOX 2.5-inch Live Valve shocks (different from earlier years). These changes mean the strut bolt patterns and geometry differ from 2024-2025 models, so this kit will not fit properly."

PS for those that have a 2024-25 Raptor these are on the prime day sale for $56!

 

[CaptAngry]

Yeah, they work just fine on a 2026. The suspension is exactly the same

Sponsored