What did you DO TO your 6G Ranger today? 🧰 🛠️ ⚙️ 🧽

[garyo]

Installed the KICKER - Hideaway 10" Compact Powered Subwoofer ac ouple days ago (it's a tight fit with the jack there) and my Gator SRX Roll-Up Tonneau Cover last night.

Speaker might have a little to much base for this old man.

Thats all the immediate items i have to do. Will likely do a ceramic coat on the windows for the heat.

Next week I'll hopefully get her all cleaned up as I've been waiting since the clear bra was installed.

Very nice sub. Sid you do the install yourself as I doubt wiring and connectors are in place for a non Raptor version truck. I’m curious if you have separate sub level control from the existing head unit etc? I’m considering same when my XLT/FX4 arrives. Thanks!

Sponsored

 

[RealTruck]

Did you have any issues with the Elevate Racks fitting your '24? For some reason Realtruck says not compatible with the '24, just the '23 Ranger.

We don't have a part number that fits the '24 just yet. The bed configurations have changed for the '24, so we are just waiting for those parts to become available.

 

[engus13]

Did you have any issues with the Elevate Racks fitting your '24? For some reason Realtruck says not compatible with the '24, just the '23 Ranger.

No issues. I Called and talked to them and they said it would fit and it does.

 

[Ford Motor Company]

This is not my Ranger Raptor but I did help a buddy install a bumper and am buying one for my Ranger Raptor. Does that count?

Thanks for sharing it with us Dex!

 

[Ford Motor Company]

Received and installed the OE missing bumper decal from the ROW Raptors

Looks great!! Hope you are enjoying the ride.

 

[Tinguely]

Super easy install of IronBison running boards.

 

[Hootbro]

Super easy install of IronBison running boards.

Those look good. Different

 

[Jason B]

I've gone and done it.
Traded my '21 STX for this '24 XLT High, FX4, 2.7V6:

Things I like:
1. Better, firmer ride.
2. Quieter, less wind noise.
3. More power.
4. Nicer interior.
5. No worries about 'water in plug 4'.
6. No worries about fan clutch, it's 2 electric fans.
7. No worries about carbon build up on valves, it's DI and Port injected.
8. The 10R60 shifts a LOT more smoothly that the 10R80.
9. No shudder on take-off.
10. No micro vibrations from drive shaft at 73MPH.

I'm not planning on doing much, other than obligatory floor mats, bed cover, seat covers, and center console organizer.

It does seem a lower than my 5G RWD, but that had a 2" level kit.
I'll probably do a level at some point after the holidays.

 

[Ford Motor Company]

Super easy install of IronBison running boards.

The install looks good! Nice Ranger, James.

 

[Ford Motor Company]

I've gone and done it.
Traded my '21 STX for this '24 XLT High, FX4, 2.7V6:

Things I like:
1. Better, firmer ride.
2. Quieter, less wind noise.
3. More power.
4. Nicer interior.
5. No worries about 'water in plug 4'.
6. No worries about fan clutch, it's 2 electric fans.
7. No worries about carbon build up on valves, it's DI and Port injected.
8. The 10R60 shifts a LOT more smoothly that the 10R80.
9. No shudder on take-off.
10. No micro vibrations from drive shaft at 73MPH.

I'm not planning on doing much, other than obligatory floor mats, bed cover, seat covers, and center console organizer.

It does seem a lower than my 5G RWD, but that had a 2" level kit.
I'll probably do a level at some point after the holidays.

Your Ranger looks AMAZING! Great photo.

 

[Strommen95]

Had Line X done for the bed and the Ford Hard Cover installed.

 

[OccamsRanger]

Tailgate letters and installed a tap for USB power from the mirror for my dash cam.

 

[ffcol]

Had Line X done for the bed and the Ford Hard Cover installed.

Does the Ford Rev cover not have drain lines? I am trying to decide which cover to get and not having drain lines is a requirement. I thought it was a rebranded BAK MX4 which has drain lines?

 

[Muffin1]

I've gone and done it.
Traded my '21 STX for this '24 XLT High, FX4, 2.7V6:

Things I like:
1. Better, firmer ride.
2. Quieter, less wind noise.
3. More power.
4. Nicer interior.
5. No worries about 'water in plug 4'.
6. No worries about fan clutch, it's 2 electric fans.
7. No worries about carbon build up on valves, it's DI and Port injected.
8. The 10R60 shifts a LOT more smoothly that the 10R80.
9. No shudder on take-off.
10. No micro vibrations from drive shaft at 73MPH.

I'm not planning on doing much, other than obligatory floor mats, bed cover, seat covers, and center console organizer.

It does seem a lower than my 5G RWD, but that had a 2" level kit.
I'll probably do a level at some point after the holidays.

Hey, looks great in CG i was torn between that & Cactus grey, and i am in agreement with all your points especially that cutch fan, thank goodness it's gone what a ticking time bomb.
Although i have the 2.3 like before so i guess I'm blessed with carbon build up

 

[Strommen95]

Does the Ford Rev cover not have drain lines? I am trying to decide which cover to get and not having drain lines is a requirement. I thought it was a rebranded BAK MX4 which has drain lines?

They do, they’re by the cab.

Sponsored