Looking for a fuel filler cover/ cap to keep out water and crud

[ATestBishop]

I had the Amazon locking one, it fit but to get a larger gas pump nozzle to fit was super tight and on second fill-up the locking cap base pulled out with pump nozzle, lucky I was in the return window, I think it's just taller than it needs to be causing the clearance issues with nozzles

Sponsored

 

[FergyA]

I printed this one but slightly scaled down to fit the ford neck instead of Chevy's.
https://www.printables.com/model/849466-2023-gmc-canyonchevy-colorado-capless-fuel-cap

Took some trial and error, but the fit is where I want it now. I'll probably reprint it with a strap at some point (or give Purdy's a try if he shares the files).

The scale I settled on was 70% in Z, and 88.94% in X/Y for a ID of ~58.7mm in TPU. I did my initial test prints in PLA and settled on 58.9mm when I had it, but that was too loose when I switched to TPU. Not sure I'd recommend using a rigid filament on this permanently as it seems to need a little stretch to fit well.

 

[ATestBishop]

I'll try to post a photo of mine which was a repurposed spray dried instant coffee jar black plastic screw top lid that was a close fit, lined it around inner circumference with foam pad strapping from bike helmet and it fits nicely...up-cycle solution

 

[DESKPOP]

I had the Amazon locking one, it fit but to get a larger gas pump nozzle to fit was super tight and on second fill-up the locking cap base pulled out with pump nozzle, lucky I was in the return window, I think it's just taller than it needs to be causing the clearance issues with nozzles

Did you push it down until it clicked on? I don't think I could remove mine if I wanted to, probably have to break the prongs inside.....weird.

 

[ATestBishop]

Oh certainly, I didn't think it was coming off easy at all and I was very careful to align when installing, was very surprised on maybe second or possibly third fill-up on removing the pump nozzle it just fell right off. My guess is that the pump nozzle pried it enough to lose the connection with some number of the plastic mini "fingers" that hold it on and it instantly fell off. If removing it or to experiment just insert a wood dowel of appropriate diameter and pry gently and I think you'll find it pops right off from the flex

 

[ATestBishop]

I was willing to keep it even though getting any pump that I used into it had noticable clearance issues, but when it popped off I had to return it. I was definitely careful removing pump each time as well and if I remember I did pre-tension the mini fingers for maximum engagement before installing. I don't understand why it needed to be as tall as it is, if it was short as possible it would maximize clearance and reduce any shear forces from pump nozzles passing thru it. Depending on the 3 I tried all were tight and at least one was very tight

 

[CaptAngry]

I printed this one but slightly scaled down to fit the ford neck instead of Chevy's.
https://www.printables.com/model/849466-2023-gmc-canyonchevy-colorado-capless-fuel-cap

Took some trial and error, but the fit is where I want it now. I'll probably reprint it with a strap at some point (or give Purdy's a try if he shares the files).

The scale I settled on was 70% in Z, and 88.94% in X/Y for a ID of ~58.7mm in TPU. I did my initial test prints in PLA and settled on 58.9mm when I had it, but that was too loose when I switched to TPU. Not sure I'd recommend using a rigid filament on this permanently as it seems to need a little stretch to fit well.

Good to see my old model is still getting use

These caps really do need to be printed in TPU to fit well. Plus TPU holds up to gas. I had that cap on my Canyon for almost 2 years and it held up great

 

[FergyA]

I just order this aluminum one - should come on Tuesday. I'll post back on the fit.

https://www.ebay.com/itm/2674322212...5339157105&toolid=10001&customid=1a02w0u65wq5

Wish it came in a color other than green! I'd worry about my wife trying to fill it with diesel lol (even though I know there are other things to prevent that). Even has a fastener hole for a lanyard if you don't care for the magnet!

 

[superj]

I would be interested in one in a different color than GREEN, which is the standard for diesel fuel! …. Not that a diesel nozzle will fit into a gasoline neck, but why make things confusing?

John Davies
Spokane WA USA

John, I wonder if you can easily strip the anodizing and put whatever color on you wish?

 

[Raptor Family]

John, I wonder if you can easily strip the anodizing and put whatever color on you wish?

Easy-Off Oven cleaner strips off anodizing. I remember this from the old days when a scratched-up set of Gold anodized Moroso Valve covers and an Air Cleaner were bought for $10, stripped with Easy-Off, and painted Candy Apple Blue to match my car.

 

[John E Davies]

It is pretty floppy, but acceptable for what it is. It is in fact TPU, not ABS.

Capless Gas Cap Dirt, Water & Dust Cover Compatible With Ford Maverick 2022-2025 Capless Gas Cap Fuel Filler Nozzle Cover Protection Accessories (red)

John Davies
Spokane WA USA

 

[josephp732]

High quality and an excellent fit. I do agree anodizing it green is a bit of a strange color choice.

 

[PA RR]

I have been using this one, it worked fine until my wife borrowed the truck and lost it.

Amazon cap

It needs to be a good fit on a 58 mm/ 2.25” neck, most are too large. I would prefer one with a tether or else one in a bright color to make it less likely to get lost. A Maverik cap might work, but I prefer a USA vendor… Any links would be greatly appreciated.

John Davies
Spokane WA USA

I got this one also works great.

 

[Connman1]

https://www.amazon.com/Locking-Gas-Cap-Fuel-Accessories/dp/B0CGZKHJ9F/ref=mp_s_a_1_2?crid=2TPNIOOW9JWNH&dib=eyJ2IjoiMSJ9.-1zgAc-VfmGoPfNwsMxZXLe4H6qTcx6bCzTz7ltaLFNSgsZj-JYil0Vu8SLwthll1YK1RMLLw43no99uVqPM3TwsSDzAD1T5JzVwLy0J1f8pfMryT8h7whq8eiyf1ieXDmXuKVgqiNjrhacg7cUZRS84g29HRRpIxDbLW7nSinq6P51f08x0BRqxEH-c63JhDGPCs0hqm3UePzEgSG2QKw.SzhLeOFuza7WpnPKRk2ltIPwNvXS0TEPKu3GwSYRcjI&dib_tag=se&keywords=ranger+raptor+locking+gas+cap&qid=1783235968&sprefix=ranger+raptor+locking+gas+cap,aps,213&sr=8-2


I have this one....works wonderfully and is locking so it makes it harder for someone to put sand in your tank or something

I bought the same one .. fits like a glove.. hopefully it works good.. when filling up…

 

[Patriot1]

Yes @DESKPOP! I too found this one on Amazon and took a chance. It fits and clears my 2025 RR fuel door and does what I need it to do keeping my fuel port as secure as possible. Despite what other Amazon reviews say, I would buy again. You cannot remove the key when the cap is removed. When you relock the cap, you can remove the key. Also works just fine when filling up! https://www.amazon.com/dp/B0CGV9SNW3?ref=ppx_yo2ov_dt_b_fed_asin_title

makes for a clean fit and finish.

Sponsored