There is a way you can turn off the auto start stop without ForScan on RR. Push the Raptor button on the right side of the steering wheel. In the raptor drive mode you can set you preferences that will be saved every time you choose to drive in Raptor mode. To set up: press the R (for raptor) on right hand steering wheel. Then press the A button on the center console. It should say on the driver instrument cluster auto start stop deactivated. Now with the other buttons on the right hand side of the steering wheel you can set the other preferences you want. Push the steering wheel and choose an option . I have comfort. Push the Shock button for the ride you want. I have mine sporty. Push the exhaust button and choose the sound you want. The with the console dial you can choose the 2 or 4 wheel drive. I have 2 wheel. When you have done all that push and hold the Raptor button again for 3-5 seconds. If it all takes you will see a red R in the back of you truck on the drivers instrument on panel. Now you all set. Then every time you start the truck push the Raptor button 2X on the steering wheel all your saved parameters will engage. If you ever want to change them just do the process all over. This is also explained on page 265 of the owners manual. Yes you will still have to push a button twice, but you get all the other choices automatically. I believe it’s a great trade off.
As far as I know they haven't written or discovered the code for that. But now that auto start/stop is being taken off US cars the dealer might be able to do it for a fee.
That one doesn't work. It causes all kinds of problems with your display.
I know. I tried some others off that sheet and they didn't work. I think the cable from 4D Tech for $100 might be your best bet for now and it's a 1 minute install.
