My 24’ Cactus Gray Ranger Build

[steveconnery]

Gotcha and thanks. I was going to use those same holes and just extend using a mending plate with a hole drilled where the mount is centered. Any reason you went with the L bracket instead?

Looks sick. Our cactus trucks are nearly twins. I’ve gotten a lot of inspiration from yours. I’ll post pics once everything is dialed.

I appreciate that man, the truck is sick!

I did the L cause I wanted it to be centered up down left right. Also the bolt that mounts the light to the brackets is like 1.5 inches long so it has to get up a bit. I couldn’t find any A piller style brackets that weren’t like 4-5 inches tall so I tried these guys. Bit of “fabrication” but pretty simple to get it to all fit, would be ideal if I could weld and make a little bracket but this was closest I could find off Amazon. 16$ experiment as oppose to trying anything more expensive

Sponsored

 

[steveconnery]

Big BC backroads trip! She held up great and had zero issues off road. Stoked!

 

[steveconnery]

Gotcha and thanks. I was going to use those same bolts and just extend using a mending plate with a hole drilled where the mount is centered. Any reason you went with the L bracket instead?

Looks sick. Our cactus trucks are nearly twins. I’ve gotten a lot of inspiration from yours. I’ll post pics once everything is dialed.

Update on this. Cut the bracket some more so the connection could fit.
This pic is before the Final Cut.
I took about 3/4 inch off the top.

I got the lights in and I’ve been having issues with one of the pods main beam and a backlight flicker. Luckily the company I ordered from has great customer service and a replacement pod is in the mail. I’m the mean time I was able to shove a zip tie inside the side of the connector to make the backlight work at least but still no main beam.
Turned out exactly as I planned. Can’t wait to get the replacement! I’ve attached a few pics to show mounting locations and such for others.

Sponsored