Ranger RAPTOR V6 FORScan spreadsheet?

[HyperM3]

Any chance you've tried to activate the Matrix headlights yet?

I have not. I don't think we have the capacity to activate that in the US.

Sponsored

 

[JustNick]

I have not. I don't think we have the capacity to activate that in the US.

Interesting, from what I understand the F150 guys were able to get it activated in the US but that's comparing apples to oranges. It wasn't a small amount of coding that needed to happen for them, so its probably nice and buried for us, assuming the adaptations are in there at all

 

[CrustyNoodle]

I have not. I don't think we have the capacity to activate that in the US.

I have the matrix headlights enabled from factory (Australia). Is there anything I can do to help you guys get yours working - like share a configuration file or something?

 

[HyperM3]

I have the matrix headlights enabled from factory (Australia). Is there anything I can do to help you guys get yours working - like share a configuration file or something?

I dont know if its just coding or if you have completely different hardware or modules.

 

[Appleman1le]

in for results, hoping for matrix headlights and auto lock when walking away!

 

[toddiscdn]

I got rid of the chime with key in, door open etc, but havent experimented any further. Would like to do Nav. on the fly like I did in my 2019 as well.

 

[FullSend]

I am able to sync up the vehicle to the forscan software just fine, and I backed up all the original modules. But once I started to make tweaks and write them in, I keep getting "service procedure interrupted" error. I tried multiple different ones and only try to make one change at a time. Anyone have this issue? I just downloaded the windows forscan version today so should have the latest version. I do have the free version, which worked fine on my Gen2, but is that the issue? Do you need the extended license or have you all been making changes with the free?

 

[FullSend]

I am able to sync up the vehicle to the forscan software just fine, and I backed up all the original modules. But once I started to make tweaks and write them in, I keep getting "service procedure interrupted" error. I tried multiple different ones and only try to make one change at a time. Anyone have this issue? I just downloaded the windows forscan version today so should have the latest version. I do have the free version, which worked fine on my Gen2, but is that the issue? Do you need the extended license or have you all been making changes with the free?

Messing with this some more, it looks like mainly the IPC modules that lead to the error but I could edit the other modules (BdyCM and APIM) just fine. Trying to disable the seatbelt chimes. So not sure if it's an issue due to the free trial, or if it's just not an option.

 

[jrRaptor]

No issues here. I use the free license (windows), just have to renew occasionally. I got rid of my seatbelt chimes without issue. I don't remember off hand which module it was, IPC maybe.

 

[HyperM3]

Messing with this some more, it looks like mainly the IPC modules that lead to the error but I could edit the other modules (BdyCM and APIM) just fine. Trying to disable the seatbelt chimes. So not sure if it's an issue due to the free trial, or if it's just not an option.

Im using the 2 month free trial version. Can you please take a picture of the modules you can access? IPC module doesnt show up for me when I load everything up.

 

[FullSend]

IPC Module at end of list, have to scroll down.

Snapshot of the error I keep getting. IPC module the only one that it occurs in. Not sure what else to try.

 

[HyperM3]

IPC Module at end of list, have to scroll down.

Snapshot of the error I keep getting. IPC module the only one that it occurs in. Not sure what else to try.

Damn, wonder why I cant see it in my version. What OBDII connector are you using?

 

[FullSend]

Damn, wonder why I cant see it in my version. What OBDII connector are you using?

OBD Link MX and MX+. Trying to see if either would edit the IPC but same result with both.

 

[FullSend]

I emailed Forscan, sent them the log file, and the emailed back this version to download. I did and was able to make edits in IPC.

https://forscan.org/download/FORScanSetup2.3.63.test20240818.exe

 

[HyperM3]

I got the cable the other day and was able to get into the IPC modules and make the changes to get rid of the seatbelt screen on startup. Thank god.....

Sponsored