Shortest hubcentric spacers?

[Fordfknranger]

Just wondering what the shortest hubcentric spacers you could run with regular stock RR wheels. I'm hoping to run 1"... Do the oem wheels have pockets like the Bronco wheels have?
(I'm running 35x11.50r17 Toyo At'3 tires with 2" Level)

Thanks

Sponsored

 

[gtistiffler]

Wheel adapters USA has some 3/8 and 1/2” slip on hubcentric ones with different lugs to bite more thread that you’ll loose.

 

[Fordfknranger]

Wheel adapters USA has some 3/8 and 1/2” slip on hubcentric ones with different lugs to bite more thread that you’ll loose.

I have tried those they do not work. The lugs don't fit through the wheels. They would not take them back either. Aholes to deal with.

 

[AdventureLab]

I have tried those they do not work. The lugs don't fit through the wheels. They would not take them back either. Aholes to deal with.

How close were they to fitting through the holes in the wheels? I would love to keep the stock wheels on ours, but the 4mm spacer I cut is obviously not hub centric, so I'm getting some vibration issues at speed. I don't mind drilling the wheels if the lug nuts are close.

 

[mAtTyG04]

I'm running the 1.25" spidertrax on the factory wheels with 35's. Which gives me like a +25mm offset. No issues.

 

[AdventureLab]

I'm running the 1.25" spidertrax on the factory wheels with 35's. Which gives me like a +25mm offset. No issues.

We have 35" Nitto Terra Grappler G3's on this one. That offset wouldn't work with our tire. A 10mm spacer would probably be perfect.

 

[ColeTrainsRR]

I have 1" BORA brand. They were expensive but just right

 

[NASSTY]

I also run 1" Bora spacers.

 

[Fordfknranger]

I also run 1" Bora spacers.

No need to shave down lugs?

 

[ColeTrainsRR]

No need to shave down lugs?

nope

Sponsored