WOLFBOX DASH MOUNT

[fordgt]

Anyone done one of these @Wolfbox dash mount? What is involved with getting the wires to the top of the dash?

Sponsored

 

[BrrRaptor]

Its tight but you can fish a wire down toward the pedals from the speaker

 

[flcnplt]

We all have our own taste, for me this looks added on and distracts from the clean lines of my Ranger.

 

[fordgt]

That is awesome! What mount dashcam combo is that?
Thanks for the response!

 

[bigb]

Where do you mount the cameras? Are they hidden from sight?

 

[fordgt]

Where do you mount the cameras? Are they hidden from sight?

I mounted the rear next to my license plate. It actually fits around the frame which keeps it from moving. I wish there was an option to rotate the picture 90° so I could put the camera mount completely behind the frame. Other people mount it to the inside of the back window and since there is factory tint it is pretty hard to spot.
I mounted the front below the bumper in the lower grill opening. With the grill insert it is pretty hard to spot. Posting this, makes me think I should look into positioning it behind the grill.

 

[bigb]

I have a Wolfbox on my Jeep. I wish they would offer a recessed flush mount camera to fit into a hole. I asked them about it and all I got was a "maybe at some point". There's probably one made that would work but I haven't checked into it. I'd like one up high and one low with a toggle switch.

 

[BrrRaptor]

That is awesome! What mount dashcam combo is that?
Thanks for the response!

Got everything from trackform

 

[stormrider151]

Its tight but you can fish a wire down toward the pedals from the speaker

So how did you drill the plastic without cracking it? I have to do the same thing but that piece looks pretty thin. Great job BTW.

 

[BrrRaptor]

So how did you drill the plastic without cracking it? I have to do the same thing but that piece looks pretty thin. Great job BTW.

I have a drill bit that's made for drilling plastic

 

[Canoman]

Where do the wires run after they get through the front plastic panel that you drilled? I want to run a couple of USB-C cables that power my Trackform magsafe chargers, and I was hopeful I could do something like this. Thanks for going first!

 

[BrrRaptor]

Where do the wires run after they get through the front plastic panel that you drilled? I want to run a couple of USB-C cables that power my Trackform magsafe chargers, and I was hopeful I could do something like this. Thanks for going first!

Down to the fuse panel. There are two empty spots that have constant and key 12+

 

[Canoman]

Ok, thanks. Where is the hole that they run through near the center speaker? Did you have to drill?

 

[BrrRaptor]

Ok, thanks. Where is the hole that they run through near the center speaker? Did you have to drill?

No, you have to fish something thin and flexible down from of the left side of the speaker hole towards the brake pedal. It is tight, took me a while to get it.
BTW, I used the thin part of a fishing pole because its flexible and not metal.

 

[RETMSG]

Got everything from trackform

What accessory did you order from trackform that the mirror attaches to? Not the rail, but the other piece.

Sponsored