FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[Connman1]

These are the prompts I followed.

Can you tell me were you found these steps?

Sponsored

 

[midnight270]

@Patriot_USMC Try following these steps exactly. Don't listen to Google AI or where ever you got those steps.

Do these in this order. IPMA, SCCM, IPC, HCM, APIM. The settings below are for matrix lighting.

IPMA

SCCM

IPC

HCM

APIM

 

[midnight270]

After I changed the modules I needed to cycle the ignition on and off a few times for it to work. You'll know it worked when you go into the Lighting settings for the truck and see "Glare-Free Lighting"

 

[Patriot_USMC]

@Patriot_USMC Try following these steps exactly. Don't listen to Google AI or where ever you got those steps.

Do these in this order. IPMA, SCCM, IPC, HCM, APIM. The settings below are for matrix lighting.

IPMA

SCCM

IPC

HCM

APIM

Awesome!! Thanks so much!

 

[midnight270]

Awesome!! Thanks so much!

Let me know how it goes. I am curious now haha.

 

[Albanogc]

Hi mate, I hope you are well.
So I'm stuck in the same spot as you with these gauges.
Turbo and Oil Pressure Activated in IPC, but they don't show any info.
Have you figured out how to make it work?

Mine is a 4x2 so I haven't enabled those modes, but, about Rock Crawl and Ruts, the biggest differences seem to be H and L.

https://media.ford.com/content/ford...selectable-driving-modes-enhance-on--and.html

Hi guys, good day to everyone.
Has anyone found how to make those gauges work?

 

[Mav R]

Tried enabling glare free high beams tonight on my 26 Raptor. Tried twice and each time I ended with 4 diagnostic codes, so I rolled back the changes.

DTCs were:

pscm - U023A:00-28 (lost communications with image processing
module A)
RCM - B00DF:4A-08 (passenger restraints disable switch - incorrect component installed)
HCM - U2101: 00-08 (control module configuration incompatible)
IPC - U0415:00-08 (invalid data received from abs control module)

Not sure what the issue is but it feels like something has to have changed?

Tried enabling glare free high beams tonight on my 26 Raptor. Tried twice and each time I ended with 4 diagnostic codes, so I rolled back the changes.

DTCs were:

pscm - U023A:00-28 (lost communications with image processing
module A)
RCM - B00DF:4A-08 (passenger restraints disable switch - incorrect component installed)
HCM - U2101: 00-08 (control module configuration incompatible)
IPC - U0415:00-08 (invalid data received from abs control module)

Not sure what the issue is but it feels like something has to have changed?

Have you been able to revert the changes and clear the DTC's. I have similar issues and can't clear the RCM code

 

[JJT]

Hi, has anyone configured the windows so they automatically close when locking the vehicle with the key fob?

 

[Patriot_USMC]

Well I was able to enable the matrix lights, but I have several HCM errors that I can’t get cleared. Ideas?

 

[SnyperX]

Hi, has anyone configured the windows so they automatically close when locking the vehicle with the key fob?

I can close mine via the keyfob by pressing lock twice and continuing to hold the lock button , windows will all close.

 

[superj]

Well I was able to enable the matrix lights, but I have several HCM errors that I can’t get cleared. Ideas?

Try starting it a few times and see if it clears itself. I notice sometimes forscan takes a few key cycles for stuff to fully work

 

[Ag3ntC00p3r]

I don't know if this will help those that are trying to enable the Glare Free Matrix Lighting, but I saved my changes and cycled start mode/power after each module change. Not after every individual change, but after all changes were made in a particular module. I have zero errors after enabling mine.

 

[Patriot_USMC]

Try starting it a few times and see if it clears itself. I notice sometimes forscan takes a few key cycles for stuff to fully work

I did 3 cycles back to back, 1 minute ACC power on, 1 minute off, followed by locking the truck with the fob and walking away for 15 minutes. And I've driven the truck 5 or 6 times since and it's still the same.

Sponsored