What did you DO TO your 6G Ranger today? 🧰 🛠️ ⚙️ 🧽

[TVRangerSTX]

Looks great! Where did you purchase the black lug nuts?

Sorry, don't check 6g often. These were a hot item on the 5g forum, on ebay, I got them for my 2019 back then, and just swapped them out on my 2024. They were in great condition after 4 years, are solid 1-piece, not 2 piece like the factory chrome. "The wheels are the eyes to the truck's soul"!

Sponsored

 

[RangerRider]

Today I installed a “TripleAliner” bed liner I received from TripleAliners .

(https://www.amazon.com/TripleAliner...Protection/dp/B0CQPB618G?ref_=ast_sto_dp&th=1).

What I like about it is the fit and finish. It’s made of Thermoplastic elastomer (TPE).
After unpacking (it comes folded in 4ths) it needs to be laid out flat for a day or so to flatten out. It comes with instruction on ways to get it flat again.

It’s ribbed to match the ribs in the bed. It has a 2” lip all around the front and sides. It’s textured and has ridge lines to keep things from sliding around.

Overall I’m pleased with it so far. Time will tell how well it holds up.

They also have floor mats too.
But I already have the Ford OEM floor mats that came with my Ranger.
https://www.amazon.com/TripleAliner...ccessories/dp/B0D9RPZDQZ?ref_=ast_sto_dp&th=1

 

[Truckin]

Ford mud flaps

 

[VehicleNanny]

Not today, but this weekend I installed a RoarPedal throttle controller and made a graphic with our Cricut.

 

[SoulMafia]

Finally got around to installing my F150 LED grill lights.

 

[biggie]

Upgrades

 

[jedadiah]

Washed off the salt.

 

[rickorat]

Weathertech impact bed mat. Added washers under the seat rails at the rear bolts. Hacked away some of the heater vent plastic under the steering column.

Bed mat will be good after a few days in the sun, if that ever happens again.

home made seat risers… jury’s still out. Gotta test it for a few days and see if I can now find the comfortable spot.

Heater vent hack, problem solved.

 

[gmarcucio]

Added black lug nuts

 

[RichD]

Husky liner for the rear seat

 

[cc1999]

Upgrades

I like your bumper lights, what all functions does that light bar have, and very curious how it’s wired in, and if your truck now thinks you have trailer hooked to it.

I have been in search for way to run my redundant lighting, tail lights, stop/turn/ reverse without rigging the auto trailer detection system. Which when it thinks it has a trailer it disables safety stuff like cross path detection, etc.

 

[nate.co]

Finally finished my audio upgrades: https://www.ranger6g.com/forum/thre...ning-speakers-stealthbox-sub-gmrs-radio.15893

Replaced the speakers, added sound deadening, replaced the sub, added a GMRS radio and antenna.

 

[Joe T]

I like bumper lights, what all functions does that light bar have, and very curious how it’s wired in, and if your truck now thinks you have trailer hooked to it.

I have been in search for way to run my redundant lighting, tail lights, stop/turn/ reverse without rigging the auto trailer detection system. Which when it thinks it has a trailer it disables safety stuff like cross path detection, etc.

@biggie, x's 2.
I'm also interested in the rear light bar questions from @cc1999 and a link to purchase if possible.

 

[RangerDaniel]

Not today, but this weekend I installed a RoarPedal throttle controller and made a graphic with our Cricut.

Not today, but this weekend I installed a RoarPedal throttle controller and made a graphic with our Cricut.

How hard was it to make this with the Cricut? Been thinking of making a custom vinyl for my bed sides

 

[VehicleNanny]

How hard was it to make this with the Cricut? Been thinking of making a custom vinyl for my bed sides

It is not difficult to make or apply, once you decide on the design. The Ranger text came first, then I played with the next line (currently "Sport 4x4"). I tried other versions, like "SuperCrew" and "FOUR WHEEL DRIVE."

I'm happy to provide more detail if you desire.

Sponsored