Sponsored

What did you do to your Ranger Raptor Today?

Bt_okst

Well-Known Member
First Name
BT
Joined
Feb 21, 2022
Threads
28
Messages
1,302
Reaction score
1,556
Location
Ok/Colo
Vehicle(s)
2026 Ranger Raptor
Removed Raptor running boards and installed Barricade

IMG_3008.webp


IMG_2996.webp


IMG_3012.webp


IMG_3002.webp
Love!!! But hope they dont let rocks annihilate your truck paint. Ko3s are rock throwers and the factory boards are all that have saved my Raptor ftom having no paint under the doors. Can hear them pinging under factory boards.
Sponsored

 

GiJoesGT

Well-Known Member
Joined
Feb 2, 2024
Threads
11
Messages
82
Reaction score
114
Location
Alabama
Vehicle(s)
F150
Occupation
Air Force
Thanks. The M/T Baha Boss are much better in rain, sand, and don't throw rocks. This is the fifth set I have owned. First set of Ko3 but all my others were KO2 and replaced with M/T and just their ability in rain is worth the swap. I was disappointed that the KO 3 were not substantially better in the rain. Instead they are marginally better and the Mickey Thompson’s are still superior and quieter. Time will tell and I may have to put some PPT on the rear fenders.
 

Sponsored

GiJoesGT

Well-Known Member
Joined
Feb 2, 2024
Threads
11
Messages
82
Reaction score
114
Location
Alabama
Vehicle(s)
F150
Occupation
Air Force
Yea its weird. The front ones made a lot more noise than I expected. Much more than the f150. So during the summer I took them off and thought I would leave the rears so I could still crack them and let Florida heat out. Just never got around to taking them off. Partly also because as weird as it seems, WeatherTech makes shields for the front, but not for the rear so I thought I would save them and see how close they come to matching and whether the WeatherTech made a lot of wind noise. that’s all I’ve ever run on my F150s The Ranger raptor ones were Ford
 

GiJoesGT

Well-Known Member
Joined
Feb 2, 2024
Threads
11
Messages
82
Reaction score
114
Location
Alabama
Vehicle(s)
F150
Occupation
Air Force
So correction on what I said, I see now WeatherTech offers the front and the rear, but before they were only offering the front. Something has changed in the last six months, which is good.
 

JR007

Well-Known Member
First Name
John
Joined
Apr 8, 2022
Threads
1
Messages
97
Reaction score
125
Location
Taunton, MA
Vehicle(s)
2024 Ranger Raptor
I have been collecting parts for several months now. Finally, everything had been installed.
  • GOAT OffRoad 2”/1” puck lift.
  • Method 703’s in Matt Black wrapped with Falken Wildpeak A/T4W’s
  • FMI UCAs and Tie Rods.
The Forscan recalibrate the ride sensors. Very straightforward. I used the document that GOAT OffRoad published. I also used the Pro-Cal to change the revolutions per minute to match that of the Wildpeaks. My speedometer seems to be within one or two tenths of a mile per hour. I am satisfied with that.

Some pictures of before:

Ford Ranger What did you do to your Ranger Raptor Today? IMG_2374
Ford Ranger What did you do to your Ranger Raptor Today? IMG_2373
Ford Ranger What did you do to your Ranger Raptor Today? IMG_2375


Some pictures after:

Ford Ranger What did you do to your Ranger Raptor Today? IMG_2379
Ford Ranger What did you do to your Ranger Raptor Today? IMG_2380
Ford Ranger What did you do to your Ranger Raptor Today? IMG_2382
Ford Ranger What did you do to your Ranger Raptor Today? IMG_2381


Only have about 100 miles on it since the upgrade, but the ride feels like factory.
 

RLE55

Active Member
Joined
Apr 24, 2025
Threads
1
Messages
37
Reaction score
33
Location
USA
Vehicle(s)
2025 Ranger Lariat / S650
Occupation
Retired x 2
I have been collecting parts for several months now. Finally, everything had been installed.
  • GOAT OffRoad 2”/1” puck lift.
  • Method 703’s in Matt Black wrapped with Falken Wildpeak A/T4W’s
  • FMI UCAs and Tie Rods.
The Forscan recalibrate the ride sensors. Very straightforward. I used the document that GOAT OffRoad published. I also used the Pro-Cal to change the revolutions per minute to match that of the Wildpeaks. My speedometer seems to be within one or two tenths of a mile per hour. I am satisfied with that.

Some pictures of before:

IMG_2374.webp


Some pictures after:
Only have about 100 miles on it since the upgrade, but the ride feels like factory.
Like the fender flares, what brand/maker or is that standard on RR?
 

Sponsored

Lion77

Well-Known Member
Joined
Feb 27, 2025
Threads
28
Messages
786
Reaction score
1,150
Location
United States
Vehicle(s)
2024 Ranger Raptor
Occupation
Electrical Engineer
Had Method 705s (ET+35) installed by dealer including the spare. Ordered from TireRack, shipped with lugnuts, centering rings (tech elected not to use them). No vibrations at 60-65, didnt have a chance to try on highway at 70+, but 65 was buttery smooth. LOVE them, even with a Pro Cal tune, the reduction in unsprung mass is noticeable, as is part throttle response. This is methods lightest beadgrip wheel at 25.2lbs. Pro Cal plus lightweight 705s and this truck moves! Plenty of clearance on stock 285/70R17 KO3s.

Ford Ranger What did you do to your Ranger Raptor Today? 1000013741


Ford Ranger What did you do to your Ranger Raptor Today? 1000013736


Ford Ranger What did you do to your Ranger Raptor Today? 1000013733


Ford Ranger What did you do to your Ranger Raptor Today? 1000013739


Ford Ranger What did you do to your Ranger Raptor Today? 1000013716
 

Highspeedplay

Well-Known Member
First Name
Mike
Joined
Jan 9, 2025
Threads
2
Messages
109
Reaction score
103
Location
Texas
Vehicle(s)
2% Ranger Raptor Carbonized Gray
Installed the Long Ranger Extended gas tank I got from Australia. 37 Gallons should give me enough range for most adventures.
Did you install , or what was the cost of the install. Thanks
 
 







Top