Nomadrider
Member
- Thread starter
- #1
2025 xlt,what is the in bed 120v outlet rated for?
Sponsored
It'll run a palm held details sander that's less than 400W.I do know it cannot run power tools.
A laptop will be fine. What you cannot run on 400 watts is anything that makes heat or cold and most power tools. 400 watts is just over 3 amps. you can run chargers and small fans and lights.Interested in running a laptop off of it
ThanksA laptop will be fine. What you cannot run on 400 watts is anything that makes heat or cold and most power tools. 400 watts is just over 3 amps. you can run chargers and small fans and lights.
the AC power outlet in the bed is shared with the outlet at the back of the console between the seats, combined they can't exceed 400watts, the rating of the inverterIt is very selective on what you can and cannot use. And full power is in Park, shared power in Drive. Check the owner's manual out for 120V power. Apparently not a true sine wave AC.
Exactly why I didn't pay for it. Plus you don't get the 12 volt outlet with the package, which was the best part, so why bother? For the console phone cooker? No thanks I like my Magsafe much better and I installed my own 12 volt outlet in the bed.A 400 watt inverter will power devices at or under 3.3 amps. While it’s a neat selling point maybe, in reality it is grossly underpowered for what many think about using a 120V outlet for in a truck. It certainly won’t run any power tools like circular saws or chopping saws. It isn’t going to power even the smallest portable welder.
It can run an 18v battery charger, but possibly not a rapid charger depending on brand and style. It’ll charge cell phones and laptops. It’ll run a mini compressor, some lighting for a camp site, some automotive trickle chargers. It might run some automotive type fridges. But most of these things can be ran off of the 12v plug inside the center condole, or the usb plugs inside of your vehicle. Plus you have to have your vehicle running to use the 120V outlet. I’m sure the overlanding group has found some unique and very helpful uses for the 120v outlet, but outside of this group, most will probably never use it.
I never paid for it either. the xlt's in canada. came standard with it. its not on my window sticker, but when I looked at the build sheet in the ford software you csn buy access for to look at the factory service manual and stuff, it shows as there. and on fordpro canada it stated all canadian 2025 xlt's it came as standard. I do see on ford canada, its now an option. i havent seen if ford pro has updated their site or not yet, but a few weeks ago it wasnt for the ranger. We also cant buy a 4x2. 4x4 is the only option for driveline.Exactly why I didn't pay for it. Plus you don't get the 12 volt outlet with the package, which was the best part, so why bother? For the console phone cooker? No thanks I like my Magsafe much better and I installed my own 12 volt outlet in the bed.