2025 Ranger - Bed 12 Volt Outlet - Final Update

[GrimCop]

kk, thank you. Maybe I'll figure out adding an inverter under the driver's seat down the road

Sponsored

 

[BradleyC]

What I was looking for

 

[nighowl2000]

so got mine for my 2026 XL STX. 12v panel is working. The 120V is not. guess ill have to figure out a solution for that. wonder if I could wire up one of those amazon DC to AC inverter boards. would have to 3d print an enclosure

 

[pezdyspensr]

so got mine for my 2026 XL STX. 12v panel is working. The 120V is not. guess ill have to figure out a solution for that. wonder if I could wire up one of those amazon DC to AC inverter boards. would have to 3d print an enclosure

Did your STX come with a blank panel to start? Did you have pre wiring behind it you could tap into?

 

[nighowl2000]

Did your STX come with a blank panel to start? Did you have pre wiring behind it you could tap into?

ya I had the blank panel in the bed and yes I had the 8 pin (and 2 pin) connector wire harness underneath.

 

[pezdyspensr]

Lucky you! No such thing on mine. Seems like the 24 STXs were particularly neutered. I am currently designing a custom circuit from the accessory terminals on the battery block and marine grade stuff like Blue Sea switch panel, Scanstrut 12v, and some custom lighting. Jealous of you folks plug and playing!

 

[ShadowDragon24]

so got mine for my 2026 XL STX. 12v panel is working. The 120V is not. guess ill have to figure out a solution for that. wonder if I could wire up one of those amazon DC to AC inverter boards. would have to 3d print an enclosure

120v wont work without the inverter under the driver seat.

 

[Sloppy_Mags]

First Mod! Installed and works great! Wanted a 12v socket for my paddle board pump. Minus all the dirt I got in my eyes this was a super easy install. Replacement even comes with wire loom clips installed.

 

[BradleyC]

Any photos

 

[alloyz250]

Any photos

Many photos starting on page 3 of this thread

 

[RHIPDX]

I was interested in 1 12v cigarette outlet and 2 USBC outlets. Not so much the 400W. Can I use the same connector and air my own plug to tap in?

 

[bigb]

I was interested in 1 12v cigarette outlet and 2 USBC outlets. Not so much the 400W. Can I use the same connector and air my own plug to tap in?

You can if you keep the total load under 180 watts (15 amps) at 12VDC.

Sponsored